How to Remove the Side Panels on a Samsung DLP TV

Samsung DLP television sets use a lamp to project a digital picture onto the screen. In some situations, such as when parts need to be inspected or replaced, portions of the television case must be opened. Remove the side panels of the TV frame to gain access to components such as the PC board, the color wheel and other parts. The side panels can be reinstalled in their original positions on the Samsung DLP TV after the needed service or repair has been completed.

Things You'll Need

• Small phillips screwdriver

Instructions

1. Unplug the power cord from the electrical outlet.

2. Remove the 14 screws holding the rear panel in place. Four screws are located in each corner with the remaining screws spread out across the back of the TV. Lift the rear panel off and set aside.

3. Remove the two screws securing the left side panel to the TV cabinet in the left rear area of the TV. Pull the left side panel off.

4. Pull the cables connected to the PC board away from the board to disconnect them. The PC board is connected to the inside of the left side panel.

5. Remove the two screws holding the right panel in place in the right rear area of the TV. Lift the right panel off of the Samsung DLP TV cabinet.

References

• Jangro: How To Replace the Color Wheel in Your Samsung DLP Television