How to Distribute a Blu-ray Signal
You can distribute the signal from your Blu-ray player to multiple TVs in your home or office by using an HDMI multiplier. The HDMI interface is the only industry-supported connection method capable of carrying the full high-definition signal from the Blu-ray's outputs to a TV or external display. The multiplier increases the strength of a signal so it can be spread to a number of displays.
Other People Are Reading
Instructions
-
-
1
Turn off your Blu-ray player.
-
2
Insert the single end of the HDMI multiplier into the HDMI Out port at the rear of your Blu-ray player.
-
-
3
Connect another HDMI cable to the HDMI OUT 1 jack on the HDMI multiplier. Insert the other end of the HDMI cable into the HDMI IN jack on the rear of the first TV.
-
4
Insert another HDMI cable into the HDMI OUT 2 port on the multiplier and plug the other end into the HDMI IN jack on the input panel of the second TV.
-
5
Connect the other TVs to the remaining HDMI OUT jacks on the multiplier. Plug the power cable into the port on the multiplier and insert the other end into a nearby power outlet.
-
6
Turn on the Blu-ray player to begin distributing the signal to the TVs.
-
1
