How to Replace a Washer Suspension Rod
The main component of your washing machine, the tub, is held up by suspension rods that keep it from falling to the bottom of the unit. When your tub leans to one side or isn’t level, it’s a sign something is wrong with your rods. Replacing the rods can vary depending on the model and style of the washer, but generally, you just thread each new rod through the opening on the top and attach it to the tub. Does this Spark an idea?
Instructions
-
-
1
Turn off your washer and unplug it from the power source. Remove the front panel of the washer. Remove the main top of the washer.
-
2
Unclip the suspension rod from its holder on the drum at the bottom of the rod. Pull the rod up through the whole in the top of the unit with one hand and pull the top plastic support out of the way. Lift the entire rod up through the opening.
-
-
3
Lower the new rod into the hole and attach the bottom to the tub’s clip. Hold the rod up with one hand and slide the top plastic support in place. Slide the rod in the hole the rest of the way and rest it on the top plastic support.
-
4
Replace the front panel and main top back onto the washer. Plug the unit back in and use as desired.
-
1
Tips & Warnings
Be sure to install a suspension rod specifically for your model washer. The best place to find compatible parts is the manufacturer or an authorized parts supplier recommended by the manufacturer.
Removing the front panel and main top of the washer can vary depending on the model of the washer. Refer your washer’s service manual if you have trouble removing them.
Remember that washing machines warranties often stipulate that only authorized repair technicians perform work on the unit. Otherwise, you can void the warranty. If you have a warranty or are unsure, contact the manufacturer of your washer to go over the details of your warranty. If it requires that a certified technician replace the suspension rod, the manufacturer can connect you with one in your area.
