SonicWALL Will Not Open Port
Your Web server's public HTTP address must be bound to the Wide Area Network zone for Internet users to easily access it behind SonicWALL, so if SonicWALL won't open a port, check how it's set up. The best way to configure a public server is to use the Public Server Wizard. Port setup options -- including Zone Access rules, Loopback, Inbound and Outbound Network Address Translation policies, and the required Address Objects -- are automatically configured based on the choices you make.
Other People Are Reading
Instructions
-
-
1
Open SonicOS, then click the "Wizard" button.
-
2
Select "Public Server Wizard," then click "Next."
-
-
3
Click the "Server Type" drop-down arrow and select a server from the list.
-
4
Check the "Services" boxes you want to enable, then click "Next."
-
5
Enter the name of the server in the "Server Name" field.
-
6
Enter the name of the server IP address in the "Server Private IP Address" field.
-
7
Enter an identifying comment referencing the location or other comment in the "Server Comment" field.
-
8
Click "Next," then enter the public IP address in the "Server Public IP Address" field. Note that if the IP address you enter differs from the default, it'll be bound to the WAN Zone.
-
9
Click "Next" and "Apply."
-
10
Click "Close" at the Congratulations dialogue box.
-
1
