How Do You Change the Oil in a John Deere 314 Hydrostatic Transmission


The John Deere 314 Hydrostatic lawn mower is a riding tractor featuring a Kohler engine that heavily relies on clean oil for proper operation. You do not need to take your John Deere 314 riding lawn mower into a shop to have its oil changed. You can drain and replace old oil within your machine's reservoir even if you have no experience with changing motor oil.

Things You'll Need

  • Pan
  • New SAE 30-grade motor oil
  • Turn off your John Deere 314 lawn mower and open the front hood that conceals the engine.

  • Check the right side of the engine for the spark plug, where the black ignition wire connects. Pull the ignition wire out of the rear of the spark plug before proceeding, for your safety.

  • Find the oil drain plug on the bottom rear of the mower, near the wheels. Place a pan under the drain plug and unscrew it to release all the old oil into the pan. Set the drain plug back into place.

  • Remove the cap and dipstick from the oil reservoir. Fill the tank with SAE 30-quality motor oil. Check the oil level using the dipstick and ensure the level of oil within the oil reservoir goes up to the "FULL" line on the dipstick, but no higher.

  • Put the oil reservoir's dipstick and cap back into place.

  • Insert the ignition wire into the rear of the spark plug once more. Close the engine's hood.

Tips & Warnings

  • Unplug the ignition wire from the spark plug before changing the oil.
  • Do not overfill the reservoir. Oil should never go past the "FULL" mark on the dipstick.

Related Searches


  • Photo Credit Thinkstock Images/Comstock/Getty Images
Promoted By Zergnet


Related Searches

Check It Out

How to Make a Vertical Clay Pot Garden

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!