The Procedure for Testing Cables

When working with cables, testing them can provide you with valuable information that will make the process of setting up a network easier. Installers and repairmen both regularly use cable testing. If you are interested in completing the process of testing cables, you may need several different types of equipment. With the proper equipment, testing cables is a relatively simple process that can be completed within a few minutes for the majority of cabling jobs.

Things You'll Need

  • Cable tester

Instructions

    • 1

      Obtain the proper equipment for cable testing. You could need one of three different types of cable testers, depending on the type of test that you need to run. You could purchase a certification tester, a qualification tester or a verification tester.

    • 2

      Use a certification tester to make sure that the system passes the industry standards. This type of tester can be used in association with the standards of the Telecommunications Industry Association or the International Organization for Standards.

    • 3

      Utilize a qualification tester to see if the cable can handle a certain speed. With this type of test, the adjuster will determine if the cable can handle certain technologies like voice over Internet protocol or Gigabit ethernet.

    • 4

      Conduct a verification test. With a verification tester, you simply determine if the cables are hooked up correctly and everything is working as it should. With many verification testers, you can also check to make sure that the wires are paired up correctly and that you don't have any split pairs.

Tips & Warnings

  • When testing cables, all testers leave a little room for error. Do a few tests just to make sure that the readings you come up with are within reason.
Related Searches

References

Related Ads

Check It Out

7 Tips for Photographing Your Kids on Halloween