How to Attach a Clamp Light to a Reptile Tank With a Screen

Save
Boy looking at a pet lizard
Boy looking at a pet lizard (Image: Jupiterimages/Goodshoot/Getty Images)

Reptiles, once confined to zoos, are now available as exotic family pets. Although they are relatively simple pets to take care of, they do have some special needs. Specific considerations must be made to replicate their original environment. Reptiles need vitamin B for healthy bones, and UVB light can be used to replicate the effect of the sun's rays to produce this vitamin. Clamp lights are designed to attach easily to the sides of terrariums to create temperate basking areas for your pet. Terrarium clamp lamps require only simple assembly and can help to maintain your reptile's well-being and happiness.

Things You'll Need

  • Terrarium
  • UVB bulb
  • Basking rock
  • Terrarium screen lid

Set up the terrarium for your reptile's specific needs. Depending on the type of reptile you have, you will need either a 2.0, 5.0 or 10.0 UVB bulb for your clamp light.

Place the basking rock in the terrarium. The rock will act as a marker for the placement of the clamp lamp over the reptile's basking area.

Turn the wing nut on the clamp counterclockwise to unscrew it. Unscrew the nut as far as possible without removing it completely.

Position the ball found at the end of the metal holster so it sits in the angled space found behind the screw on the clamp.

Position the lamp in place. Keep a hold on the holster throughout this process to ensure that the clamp light can be secured as tightly as possible to the side of the terrarium.

Slide the cylinder found at the back of the lamp into the large grips on the clamp.

Tighten the clamp's wing nut by rotating it clockwise. The clamp lamp and holster should now be fully secure, with the clamp holding the parts together.

Slide the plastic-covered portion of the clamp light holster on the top edge of the terrarium.

Position the lamp at the correct angle so the rays from the clamp light will cover the entire basking area.

Tighten the clamp for a final time so the clamp light stands securely over the terrarium.

Slide the screen lid into place on top of the terrarium. There will be a small gap at the top of the terrarium where the screen lid meets the attached clamp light. As long as the clamp light has been secured correctly, the size of the gap will not be large enough to allow your pet reptile to escape.

Related Searches

References

Promoted By Zergnet

Comments

Related Searches

Check It Out

How to Make an Elevated Dog Feeder

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!