Breakfast nooks are small seating areas tucked into a corner of a kitchen or adjacent room, where families can sit to eat breakfast. Because a breakfast nook takes up space that could otherwise be used for storage, it is a good idea to building a breakfast nook with seating that can be used for storage. The simplest way to make storage in a breakfast nook is to build the seats into a trunk with an upholstered lid seat.
Things You'll Need
- Tape measure
- 20 two-by-four pieces
- 5 sheets of 3/4-inch-thick MDF
- Circular saw
- Wood glue
- 32 long screws
- Furniture foam
- Upholstery fabric
- Staple gun
- 2 hinges
- 4 short screws
Use a tape measure to measure the space available to build your breakfast nook. Measure the height of the legs and depth of the seat on a chair you find comfortable. This will be the height and depth of your breakfast nook's seat. Write down all these measurements on a piece of paper.
Cut 6 pieces of two-by-four to the length of the available space with a circular saw. Cut 8 pieces of two-by-four to the depth of the chair, minus 8 inches. Cut 6 pieces of two-by-four to the height of the chair legs, minus 6 inches. Cut one piece of 3/4-inch-thick MDF to a rectangle of length equal to the length of the available space and width equal to the depth of the chair.
Glue two of the chair depth two-by-four pieces at right angles to two of the long pieces of two-by-four, to form a rectangle as the base of the nook's frame. Screw the pieces together using two long screws per joint. Countersink the screws to keep them from sticking out of the wood frame. Build two more rectangles in the same manner.
Glue and screw four two-by-four chair-height pieces to the corners of one of the rectangles, so the two-by-four pieces stand upright. Glue and screw another rectangle to the other end of these standing pieces in the same manner, to form a long box frame. Glue and screw a piece of two-by-four to the middle of each long face of the box, for extra strength. Use two long screws, countersunk, each time.
Glue the furniture foam to the MDF sheet you cut, and cut off any excess foam around the edges of the sheet. Place the upholstery fabric over the foam, and pull it tight around the MDF sheet. Turn the sheet over, and staple the fabric to the underside to hold it in place. Trim off any excess fabric once it is secured in place. This is the seat of your nook.
Measure and cut four more sheets of 3/4-inch-thick MDF to cover two of the long sides of the frame plus the two ends. Glue and screw the sheets to the frame. Place the closed hinges on the top of the frame at the back, and mark where they will sit. Cut recesses for the hinges into the wood with a chisel. Place the hinges in the recesses.
Place the seat on top of the frame. Mark the position of the hinges on the seat. Cut recesses for the hinges with the chisel. Screw the hinges to the frame. Screw the hinges to the seat. Place the completed nook seat where the nook is to stand.
Tips & Warnings
- Instead of standard chest nook storage, consider replacing the front MDF panel in your nook with a cupboard or a set of drawers. This will add a quirky look to your nook, which may better suit some homes while still providing storage space.
- Always wear a mask and goggles when you cut wood, especially MDF. Always wear gloves when you cut wood.
- Photo Credit Ryan McVay/Digital Vision/Getty Images
How to Build a Breakfast Nook
You may not always need to sit in the formal dining room for your meals. And a standard kitchen table and chairs...
How to Build a Corner Kitchen Nook
Kitchen nooks were once included in every new home. They provided a place for quick meals away from the formal dining room....
How to Build a Kitchen Corner Bench
A kitchen corner bench provides a built-in seating area in the kitchen. A corner bench can be hung on a wall or...
How to Build a Corner Storage Bench Seat
A corner storage bench provides a great use of corner space, whether you use it as a spot to sit and put...
How to Build Breakfast Nook Benches From a Church Pew
Wooden church pews are built to last a lifetime. Occasionally, churches renovate and sell their old pews to the public. Church pews...