×
Back Button

I Cannot Open My Pella Storm Door

Christopher John

Pella offers a complete selection of windows and doors, including a collection of storm doors. If you have a Pella storm door, carry out the proper ongoing maintenance on the door to avoid future problems with the door's operation.

One problem that might arise is when it is difficult, if not impossible, for you to open the storm door. When this situation occurs, troubleshoot the door components to get rid of the problem and allow the door to open as it should.

  1. Twist the hinge rail screws a quarter turn each, counterclockwise, using a flat screwdriver. This loosens the tension in the hinges to make the door easier to open. The hinge rail runs vertically along the hinge side of the door.

  2. Spray a silicone spray lubricant into the door's latch mechanism. Wipe off any excess lubricant with a rag. Try to open the door.

  3. Find the latch rail on the latch side of the storm door, which is the side with the latch and door handle opposite the hinge side. Do this if you still cannot open the storm door after loosening the hinge rail screws and lubricating the latch mechanism.

  4. Extract the five screws from the latch rail, using a screwdriver, and remove the latch rail from the side jamb. This frees the storm door to open.

The Drip Cap

  • Pella offers a complete selection of windows and doors, including a collection of storm doors.
  • If you have a Pella storm door, carry out the proper ongoing maintenance on the door to avoid future problems with the door's operation.
  • This loosens the tension in the hinges to make the door easier to open.