How to Disable a Vector Smoke Detector and Alarming System

The Vector security control panel allows you to automate the function of your domestic alarm system from one point. From it, you may disarm all of your alarms to stop them from sounding and sending information to your security agency in the event of a fire or an intrusion. Once you've done so, your home will be unprotected and help will not be called in the event of an emergency.

Things You'll Need

• Security code
• Pen and paper

Instructions

1. Open your control panel.

2. Enter your security code using the keypad.

3. Hold down the "Off" key. If an alarm has sounded, make a note of the numbers shown on the control panel's digital display and enter your security code and depress the "Off" key again. You may need to supply the data shown to your security agency. The "Ready" indicator on your control panel will illuminate when your system has been disarmed.

Tips & Warnings

• If the "Ready" indicator does not light once you've disarmed your system, go to the protection point shown on your control panel's display to rectify the problem. One of your doors or windows may be open. If your system still shows an error, contact your security agency.

References

• Froula Alarms Systems: Vector User's Manual