How to Apply Pea Gravel Using Chip Seal


Chip seal is a treatment of liquid asphalt applied to gravel roads, driveways and other surfaces to hold loose materials in place while preventing water damage. Known for its round shape, pea gravel offers an attractive, but unstable surface. Using chip seal over pea gravel is a simple, affordable way to enhance your yard with the colors and smooth walking surface of pea gravel minus the heavy maintenance.

Things You'll Need

  • Rake
  • Hot asphalt sprayer
  • Pea gravel
  • Rubber roller machine
  • Push broom
  • Rake the gravel base so it gently slopes away from the home and fills in any low areas.

  • Use a sprayer to apply an even layer of hot liquid asphalt over the gravel base. If you’re working on a large patio or driveway of length, mount the sprayer to the back of a truck.

  • Pour pea gravel over the hot asphalt and spread the small piles with a rake for even coverage.

  • Go over the pea gravel with a rubber roller machine 2 to 4 times to press the rocks into the asphalt. Work in the same order that the asphalt was applied so that the gravel is compacted before the asphalt starts to cool.

  • Wait about 4 hours for the chip seal to harden, and then sweep any loose gravel from the surface with a push broom. Loose rocks can grind off some of the seal under foot or from car traffic. Sweep the surface again after the gravel and seal sets for 2 days, then open up the surface for use.

Related Searches


  • Photo Credit Images
Promoted By Zergnet



You May Also Like

  • What Is Chip Seal?

    A chip seal is a treatment of the surface of a paved road. It is designed to seal and protect the pavement...

  • How to Make A Gravel Patio

    Build an environmentally friendly, water permeable patio using gravel as the primary building material.

  • How to Install a Pea Gravel Driveway

    Pea gravel is a green, eco-friendly alternative to traditional concrete or asphalt drives. According to European Stone Inc., the cost is much...

  • DIY Pea Gravel Concrete Finishing

    Pea gravel concrete finishing can be completed by the average do-it-yourself homeowner. The mixture consists of pea gravel and Portland cement, and...

  • How to Chip Seal a Gravel Road

    Chip sealing is a process of covering a gravel road with a layer of liquid asphalt and then a layer of small...

  • How to Paint Gravel

    Many gardeners and homeowners choose to paint the gravel for their paths or other garden areas. Painting the gravel adds uniformity and...

  • How to Gravel and Tar a Driveway

    A tar-and-chip driveway, constructed from layers of gravel, tar and gravel chips, can be a cost-effective and attractive driveway option in many...

  • Does Pea Gravel Work in a Driveway?

    When building a driveway, you can choose from a number of materials besides concrete and asphalt. Pea gravel is one option that...

  • Cost of Chipseal Vs. Paving

    Chipseal and repaving are two options for resurfacing an existing road or driveway. These methods can extend the life of a road...

  • How to Repair Stamped Concrete

    Stamped concrete can be repaired using a polymer modified concrete slurry to fill in the damaged spaces. Re-stain and seal a repaired...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!