How to Disassemble a Euro Pro Sewing Machine
Euro Pro is a home appliance company that specializes in manufacturing kitchen, garment and cleaning products. Sewing machines are among the appliances made by Euro Pro. If you have a Euro Pro sewing machine that you need to pack, put away or repair, it helps to know how to disassemble it without causing damage to the parts. When you put the sewing machine together, pay attention to the different sections of the machine so that you remember how to undo them. Or, if you inherited or purchased the machine already assembled, you will have to learn from scratch. Does this Spark an idea?
Instructions
-
-
1
Rotate the lever or wheel that is connected to the needle, bringing the needle up. Remove the needle bar. Unscrew the screws in the needle bar with a screwdriver, which is the section of the Euro Pro sewing machine responsible for housing the needle.
-
2
Remove the thread tension knob on the front of the machine by the needle by unwinding it. Make sure the needle is removed, too, to avoid injury.
-
-
3
Unscrew the bottom plate of the machine, underneath the needle. This exposes the feed dogs and is where the motor is located.
-
4
Pull apart the side casing by unlatching or unscrewing it, depending on the model of your Euro Pro machine. The side casing is where you will find the belt and the crank-connecting rod cam, which is what operates the sewing machine. Once this is opened up, you can slide out the motor bracket in the front where the stitches are made.
-
5
Disassemble the smaller components last, such as the smaller screws, the belt, and washers and nuts. Make sure you have a neat pile of all of the parts so that you do not lose anything. In the instance that you misplace a part, Euro Pro sewing machine parts can be ordered and replaced through stores that sell the brand.
-
1
Tips & Warnings
Never disassemble a sewing machine that is still plugged into an outlet.
References
- Photo Credit Jupiterimages/Photos.com/Getty Images
