How to Remove Toe Tap Bathtub Stoppers

Clearing a drain on a bathtub with a toe-tap stopper requires removing the stopper from the drain. Toe-tap stoppers look and work similar to lift-and-turn stoppers. One of the differences is that the toe-tap stoppers do not require a set screw to secure them to a drain. The stoppers thread into the drain. Removing a toe-tap bathtub stopper might require some force if the threads securing the stopper are damaged.

Things You'll Need

• Towel

Instructions

1. Place a towel in the bottom of the bathtub to protect the tub's finish while you work. Working from inside a tub is less awkward than working while leaning over its side.

2. Lift the toe-tap stopper with your fingers until it will lift no farther. Turn the stopper counterclockwise.

3. Pull upward on the stopper as you turn it counterclockwise if the stopper only spins instead of unscrews from the drain. If the stopper merely spins while you turn it, then its threads are most likely stripped, and the pressure from pulling the stopper upward while turning it should be enough to remove it from the drain.

Tips & Warnings

• Inspect the rubber grommet on the stopper's bottom before reinstalling the stopper. If the grommet is cracked or split, replace it with a new grommet.

References

• Delta Faucets: Drains; Frequently Asked Questions
• Kohler Co.: Installation and Care Guide, Toe-Tap Bath Drain