How to Fix the Toshiba DLP Problems With White Spots
Your Toshiba Digital Light Processing (DLP) projection TV may display white spots or snow from time to time. Noise commonly comes from a disc, video cassette or a cable broadcast station sending a weak signal. Several DLP models are equipped with CableClear/DNR, a digital noise reduction feature you can enable to eliminate the problem.
Other People Are Reading
Instructions
-
-
1
Tighten all connections between external equipment and your TV. Secure the cable line from the TV to the wall terminal outlet.
-
2
Press the "Menu" button on your remote.
-
-
3
Use the directional arrow buttons to make your selections. Select the "Video" menu.
-
4
Go to "Advanced Picture Settings." Press "Enter."
-
5
Select "CableClear" or "DNR."
-
6
Select "Auto" to automatically reduce noise based on noise level. Select "Low" to reduce a minimal amount of noise. Select "Middle" to reduce a moderate amount of noise. Select "High" to reduce a large amount of noise. Select "Off" to turn off the feature. Press "Done."
-
1
Tips & Warnings
CableClear/DNR feature is not available for digital cable modes, ATSC, HDMI/DVI and IEEE1394. It works with 480i resolution video signals. Contact your cable or satellite TV provider to check the cable lines if you use a connection that uses a video signal other than 480i.
