How to Do the Corners on a Vinyl Upholstered Chair

Save

Complete a do-it-yourself project by attaching vinyl to an upholstered chair seat for a professional-look to the seat surface and corners. Vinyl has a plastic-like texture that creates a sturdy and washable surface that works well on kitchen and dining room chair seats, versus covering an entire chair in this type of fabric. Purchase vinyl for upholstery at fabric and craft stores for a low-cost project that you can do in about one hour.

Things You'll Need

  • Staple gun
  • Staples
  • Scissors
  • Staple or tack the vinyl to the chair seat, leaving the vinyl loose 1 inch on each side of the corner.

  • Pull one side of the corner taut with a crisp edge from the end of the staples about 1 inch past the corner point. Staple this edge to the chair seat.

  • Pull the other side of the corner taut to create a crisp edge. Fold the vinyl to the backside so the corner is smooth and the excess vinyl does not show when you flip of the seat. Make a pleat fold at the corner if the vinyl shows on the right side. Staple the or tack the vinyl to the backside of the seat.

  • Repeat these steps on each corner to secure the vinyl to the upholstered cushion.

  • Cut off excess vinyl on the backside of the seat cushion to a distance of 3/4- to 1-inch from the staples.

  • Attach the seat cushion on the chair after securing the corners. Trim additional vinyl from underneath the seat if it does not lay flat on the chair frame.

Tips & Warnings

  • Choose vinyl that bends and moves easily so you can fold it over the seat cushion when upholstering the chair.

References

  • Photo Credit Hemera Technologies/PhotoObjects.net/Getty Images
Promoted By Zergnet

Comments

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!