How to Remove the Back of an LG Tromm Dryer

Save

The LG Tromm is a front-loading dryer with a control panel located at the top of the unit like a top-loading dryer. Unfortunately, this design makes taking apart the unit somewhat difficult. Instead of simply removing the back panel to access the innards of the unit, you must remove everything before taking off the panel. Removing the back panel may be necessary if it is damaged, causing the tub of the dryer to rattle.

Things You'll Need

  • Two putty knives
  • Screwdriver
  • Slide putty knives under each side of the top cover.

  • Push the top cover back and lift up on it to remove it.

  • Open the door of the unit.

  • Remove the two screws from the bottom of the door opening.

  • Remove the two screws from the top of the front panel. Pull the cabinet cover toward you. Pull on the wire connector for the door switch at the plastic to prevent ripping the wires from the connector, and remove the cabinet cover.

  • Remove the four screws, one from each corner of the tub drum. Pull the tub drum forward to remove it from the back cover.

  • Remove the seven screws from the back cover. Pull the back cover off the unit.

References

Promoted By Zergnet

Comments

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!