How to Delete Programming on a Hunter Thermostat

Save

Hunter programmable thermostats allow you to set different temperatures for various times of the day and days of the week. This saves you money by preventing the air conditioner or furnace from running during times no one is home. If you need to reset the settings, you don't need to clear them individually for each time and day. You can reset them all at the same time using the reset button.

Things You'll Need

  • Paper clip
  • Open the faceplate on the Hunter thermostat.

  • Twist a paper clip so one of the ends is sticking out.

  • Press the end of the paper clip into the "Reset" pinhole and hold it for two seconds to clear the programming. The location of the hole varies depending on the model, but it is usually located near the bottom or side of the front panel and is clearly marked.

Tips & Warnings

  • When you perform a reset, the thermostat will return to the factory specified settings. The settings vary depending on whether the thermostat is set to heat or cool mode. For heat mode, the temperature is set to 68 degrees starting at 6 a.m.. It drops to 60 at 8 a.m., rises to 68 at 4 p.m. and drops to 60 at 10 p.m.. For cool mode, it is set at 78 degrees at 6 p.m. The temperature rises to 85 at 8 a.m., drops to 78 at 4 p.m. and rises to 82 at 10 p.m.

References

Promoted By Zergnet

Comments

Resources

Related Searches

Read Article

19 Home Decor DIYs That Only Look Expensive

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!