Repairing Snags in Upholstered Furniture

Save

A snag in a conspicuous place can ruin the look of an otherwise nice piece of upholstered furniture. Your first inclination may be to knot, cut or pull the snag to remove it, but this can cause a hole or a run in your furniture, making the problem much worse. Fix the snag with a simple and straightforward process that will hide the thread and prevent it from coming loose again.

Things You'll Need

  • Sewing needle
  • Liquid fray preventer
  • Thread a sewing needle with the end of the snag. If the snag is a loop, cut it in half to create two loose threads and fix each separately by threading them onto the needle one at a time.

  • Poke the needle down into the fabric as closely to the base of the snag as possible.

  • Push the needle halfway into the fabric and push the point up out of the fabric about 1 inch away from the base.

  • Hold your finger over the needle's exit hole and push the needle slowly out. Use your finger to apply pressure and let the thread slip out of the needle, leaving it on the inside of the upholstery.

  • Apply a thin layer of liquid fray preventer over the base of the snag and the needle's exit hole.

Related Searches

  • Photo Credit Photos.com/AbleStock.com/Getty Images
Promoted By Zergnet

Comments

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!