How to Make a Bean Bag Toss Game With Multiple Holes
Bean bag toss games can provide hours of entertainment for the whole family. If you're on a budget, you can build your own bean bag toss game with some lumber and a few tools. To increase the level of fun, cut multiple holes. Within a day, you'll have a custom bean bag toss game ready to play.
Other People Are Reading
Things You'll Need
- Safety glasses
- 1/2-inch plywood, 2-by-4 feet
- Circular saw
- 4-foot, 2-by4-inch boards, 2
- 20-inch, 2-by-4-inch boards, 2
- Nails
- Nail gun
- Miter saw
- 10-inch long 2-by-4-inch board
- 6-inch hole saw
- Drill
- Medium-grit sandpaper
- Orbital sander
- Air compressor
- Paint
- Paintbrushes
- Polyurethane
Instructions
-
-
1
Fasten the two pieces of 4-foot and the two pieces of 20-inch 2-by-4 lumber together to create a rectangle by driving nails with a nail gun through the ends of the lumber. Lay the pieces on edge, with the 20-inch pieces inside the 4-foot pieces.
-
2
Lay the rectangle frame on the ground and place the 2-by-4-foot plywood on top of the rectangle frame. Attach the plywood using the nail gun.
-
-
3
Cut a 45-degree angle on the ends of the 10-inch 2-by-4 pieces, using a miter saw. These are the legs.
-
4
Fasten the legs to the underside of the plywood, adjoining each leg to the rectangle skirt using the nail gun.
-
5
Drill multiple 6-inch holes as desired in the plywood with a hole saw connected to a drill. Then, sand the entire game by attaching medium-grit sandpaper to an orbital sander and sanding smooth.
-
6
Blow off the dust with an air compressor. Paint your bean bag toss game with exterior paints using a paintbrush and let dry three to four hours. Then apply a coat of polyurethane to seal the wood using a clean paintbrush. Allow to dry overnight, then enjoy the game.
-
1
