DIY Wreath Stand

A PVC wreath stand can be used indoors and outdoors.

With a wreath stand, retailers can showcase any wreath for a holiday event, or you can even display a personal wreath at your front door. A wreath stand will not only display your wreath, but also function as a temporary storage area that will help keep it from getting damaged. Build your own wreath stand using polyvinyl chloride, or PVC, pipe and PVC glue. These materials will work for wreaths in all sizes.

Things You'll Need

• Tape measure
• Wreath hook or large coat hook, with screws
• PVC pipe , 2-by-48 inches
• Drill
• Drill bit set
• Screwdriver
• PVC corner joint, 5-way, 2 inches
• 4 PVC pipes, 2-by-16 inches
• 5 PVC end caps, 2 inches
• PVC glue

Instructions

1. Position your wreath hook on top of your 48-inch PVC pipe so it is 4 inches away from the end of the hook. The hook is parallel with the pipe. This end will be the top of your wreath stand. Draw a dot inside each screw hole that is on the hook, and drill a hole in each mark that is half the diameter of the screws that came with the hook.

2. Glue the end of the 48-inch pipe into the 5-way joint so it is perpendicular to the other four openings on the joint. Glue a 16-inch pipe into each of the last openings on the 5-way joint, and glue an end cap onto the end of each pipe. Let the glue dry according to the instructions listed on the package.

3. Screw the wreath or large coat hook to the pipe using the screws provided.

References

• PVC Workshop: How to Cut and Glue PVC Pipe