Things You'll Need
Vise
2-inch PVC pipe
Hacksaw
PVC glue
4-way PVC joints (2)
PVC elbow joints (4)
When taking portraits of friends and family, creating a proper background is crucial to the success of the pictures. Many professional photographers use curtain backdrops to control what is seen behind the subjects of the picture. You can build a simple stand for a curtain backdrop out of PVC pipe and a few joint pieces. Once you have finished building it, the stand can be broken down and reassembled in minutes.
Step 1
Clamp 2-inch PVC pipe in a vise and cut four 10-foot sections with a hacksaw. Cut four additional 1-foot sections.
Video of the Day
Step 2
Apply PVC glue into the opposite flanges on a 4-way PVC joint, then insert 1-inch pipe sections. Repeat this process with the other two 1-foot pipes and another 4-way joint. Allow the glue to dry.
Step 3
Insert an elbow joint onto each end of one 10-foot section of pipe, then insert additional 10-foot pipes into the other flanges of those elbow joints to create a large "U" shape.
Step 4
Insert the final 10-foot pipe into the side flanges of the 4-way joints. The pipe will lay perpendicular to the 1-foot pipes, forming a long "H" shape with the final flanges pointing up.
Step 5
Insert the ends of the "U" shape into the upward-facing flanges on the "H." The result is a square frame that is held vertically by the 1-foot supports on the bottom.
Step 6
Glue an elbow joint to the ends of each 1-foot pipe, facing downward, to act as feet for the stand. Allow the glue to dry.
Tip
Attach a curtain to the stand either with traditional curtain rings at the top, or by tying ropes through grommets in the curtain around the perimeter.
You can also make a 10-by-20-foot stand or a 20-by-20-foot stand if desired. Switch to 3-inch PVC pipe and joints in these cases for extra strength.
Warning
Only glue the "feet" pieces together. The rest of the stand must be able to break down.
Video of the Day