How to Applique With One-Sided Fusible Webbing
Novice and experienced quilters alike prefer using fusible web appliqué, but for different reasons. Those new to appliqué can appreciate the ease with which fusible web appliqué is applied. More experienced users can leverage the inherent application technique of fusible web appliqué to create more intricate designs than they could otherwise achieve. Regardless of your skill level, however, the technique for applying one-sided fusible webbing appliqué is the same.
Other People Are Reading
Things You'll Need
- One-sided fusible webbing
- Marking pen or pencil
- Light box (optional)
- Scissors
- Fabric
- Iron and ironing board
- Needle and thread
- Sewing machine (optional)
Instructions
-
-
1
Trace your pattern pieces on the paper side of the fusible webbing with a marking pen or pencil. Keep in mind that the pattern will be reversed. Use a light box if desired for a clear image.
-
2
Cut out each of the pattern pieces from the fusible webbing. Cut approximately 1/4 inch from the outside of the traced lines. You will cut on the traced lines in a later step.
-
-
3
Lay out your chosen fabric with the wrong side up on the ironing board. Place the pattern pieces on the fabric with the paper side up. Press with a medium/hot dry iron.
-
4
Allow the fabric and webbing to cool. Cut out the shape on the tracing lines. Use sharp scissors and cut carefully to avoid fraying of the edges.
-
5
Peel the paper backing off of the pattern piece. A layer of adhesive from the fusible webbing will remain on the fabric.
-
6
Place your applique cut-out onto your chosen fabric with the adhesive side down and fabric right side up. Press with the medium/hot iron until fabrics are completely fused, or approximately 30 seconds.
-
7
Allow your project to cool completely. Stitch around the edges using a blanket stitch if stitching by hand, and a zig zag stitch if using a sewing machine.
-
1
References
- Photo Credit Jupiterimages/Polka Dot/Getty Images
