How to Dry a Snowboard After Riding
After your day of riding, it helps to give the snowboard a good wipe down and once over to keep it functioning at peak performance. Snowboards, by design, are made to withstand extreme elements that include slush, ice, snow and -- when those melt -- water. Even though the boards are sealed to prevent delamination, it doesn't hurt to dry the board as soon as possible after your day's session.
Other People Are Reading
Instructions
-
-
1
Set the board up against a post or wall. Wipe the entire board down, using a gloved hand to rid it of any ice or snow accumulation.
-
2
Set the board in an entryway stand or a warm room, and let any remaining ice or snow melt and begin to bead off the board. As a courtesy, put a rag under the board so no pools of water accumulate on the floor.
-
-
3
Wipe off the board with a clean towel or nonabrasive rag. Go over the entire front and back, in the bindings and along the edges. Take care not to cut your fingers on the metal edges.
-
4
Push the bindings up and down, to ensure the moisture is out of the moving parts.
-
5
Inspect the board, once dry. Since you are taking the time to dry and clean the board, check for hits, scratches or any edge damage that requires repairs.
-
1
References
- Photo Credit Photos.com/PhotoObjects.net/Getty Images
