How to Install the Brookstone Headphones Connection to a TV
Connect the receiver for your Brookstone wireless headphones to the audio or headphone jack on your TV to transmit the audio signal from your TV to the headphones. You can then use your headphones to watch TV without disturbing others around you. The receiver connection is designed to work with most TVs regardless of the audio port configuration on the back of your TV.
Other People Are Reading
Instructions
-
-
1
Locate the input panel on the back of your TV and determine if you have a headphone jack or only Audio OUT ports.
-
2
Insert one end of the included 3.5 mm stereo cable into the headphone jack on the back of your TV or plug the dual ends of the included 3.5 mm audio-to-RCA cable into the Audio OUT ports.
-
-
3
Connect the other end of the cable to the Audio IN port on the back of the receiver. Plug the power adapter into a power source and insert the other end of the cable into the DC jack on the back of the receiver.
-
4
Flip the "Transmitter" switch to the "On" position to begin sending audio to your Brookstone headphones.
-
1
