How to Build an Arbor Press
An arbor press uses a wheel and a lever to create downward pressure used to press things together. It is made up of a main frame and a press bar installed vertically. You would then place the items you need pressed underneath the press bar and apply pressure to the lever. You can build an arbor press with a drill press and arbor. Does this Spark an idea?
Other People Are Reading
Things You'll Need
- Rag
- Acetone
- Hammer
- No. 000 steel wool
- Wood
- Diamond-coated file
- Drill press
- Arbor
Instructions
-
-
1
Lower the drill press to its lowest possible level.
-
2
Scrub the arbor and socket with the No. 000 steel wool to remove grease or particles.
-
-
3
Take the chuck key and retract the gripping jaws at the end of the arbor.
-
4
Wipe the surfaces of the arbor and socket with acetone. Place the arbor in the socket.
-
5
Set a piece of wood at the end of the arbor and tap the bottom of the wood with your hammer to set the arbor into the drill press socket.
-
1
