How to Troubleshoot a Sanyo PLC XF35N
The Sanyo PLC-XF35N is a multimedia projector that displays content in both hi-definition and standard-definition. While it may be used as a rear projection or mounted to a ceiling, it may fail to perform well if it isn't properly set up and maintained. Common problems that could arise include display and power issues, incorrect settings and lamp problems. Before calling a technician or sending your unit for any kind of repairs, a few troubleshooting guidelines may improve performance.
Other People Are Reading
Instructions
-
-
1
Make sure your Sanyo PLC XF35N projector is plugged into an AC outlet if it isn't turning on. Press the "MAIN ON/OFF" button to turn on your projector, and then push the "POWER ON/OFF" switch to the "ON" position.
-
2
Check the "READY" indicator lights. If you previously turned off your projector, wait at least 90 seconds for the "READY" light indicator to turn green before turning it back on.
-
-
3
Wait a few minutes if both the "WARNING TEMP" and the "READY" indicator flashes. If they keep flashing, the projection lamp may need replacement. To replace it, turn off the projector and disconnect it from AC power.
-
4
Let it cool down for at least 45 minutes, and then loosen the three screws on the lamp cover. Remove the lamp cover.
-
5
Loosen the two screws and pull out the lamp assembly. Insert a new lamp, and then tighten the screws on the assembly. Replace the lamp cover and tighten the three screws. Connect your projector back to AC power and turn it on.
-
6
Press the "MENU" button to launch the "ON-SCREEN MENU." Press the "LEFT" or "RIGHT" arrow buttons and select the "SETTING" icon.
-
7
Select the "Ceiling" option if you want to adjust the image projected from a ceiling mount. This may be necessary if the picture is top/bottom reversed. Select "Rear" if you want to adjust the image projected on a rear projection screen. Select "Display" if you want to adjust your picture settings.
-
8
Check the connections to your computer or video equipment if the projector isn't displaying on your screen. If you just turned on your projector, wait at least 30 seconds for the image to display.
-
9
Check the audio connections from your projector to your computer or video equipment if you can't hear anything. Press the "Volume Up" or "Volume Down" buttons to increase or decrease volume.
-
1
Tips & Warnings
To maintain proper picture quality, Sanyo recommends replacing two lamps at a time.
