How to Replace the Trigger on a Stock Saiga
The Saiga 12 is a tactical, semi-automatic shotgun that comes in various styles, such as with a rear stock or without a rear stock. Properly maintain your Saiga to prevent the components from failing. If you find a certain component, such as the trigger, needs to be replaced you can disassemble the rifle and replace the trigger yourself. Does this Spark an idea?
Other People Are Reading
Instructions
-
-
1
Press the release button located where the magazine meets the underside of the rifle and simultaneously slide the magazine out of the rifle.
-
2
Pull the chamber bolt on the side of the chamber back in order to expose the chamber and verify the gun isn't loaded.
-
-
3
Press the plunger on top of the hammer down and simultaneously pull the barrel cover off the weapon.
-
4
Lift the spring-loaded retracting mechanism out of the weapon.
-
5
Use your Phillips screwdriver to remove the two screws above the trigger guard to free the trigger assembly.
-
6
Lift the trigger assembly out of the rifle and fit a new one in its place.
-
7
Replace the screws on the top of the trigger guard.
-
8
Replace the spring-loaded mechanism and chamber guard.
-
1
