DIY Replacement of the ERC on an Amana Range

Amana ranges use an electronic range control, or ERC, to control all aspects of the oven, including the mode selection and temperature controls. Additionally, the ERC contains a display, showing the time of day when the oven is not in use, and outputting oven information, such as the cooking mode and oven temperature during the operation of the oven. If the ERC fails, you will not be able to control the oven until it is replaced. Fortunately, replacing the ERC is a do-it-yourself task that requires common household tools.

Things You'll Need

• Screwdriver

Instructions

1. Pull the range away from the wall, then unplug the power cord from the wall outlet.

2. Remove the screws securing the upper rear panel of the range, and then remove the panel.

3. Remove the screws securing the ERC to the control housing, and then remove the ERC. Do not disconnect the wires.

4. Peel off the overlay of the ERC if necessary, and then affix it to the front of the new ERC.

5. Secure the new ERC to the control housing using the screws removed from the old ERC.

6. Transfer the wires, one at a time, from the old ERC to the new ERC, using care to ensure that the pins do not become bent.

7. Replace the rear panel of the range.

8. Plug the range's power cord back into the wall outlet and then push the range back against the wall to complete the repair.

References

• Sears Parts Direct: Amana Range -- Backguard
• Repair Clinic: Oven Control Board