How to Put a Band on an MTD Yard Machine

The band --- commonly referred to as the belt --- on the MTD Yard Machine riding lawn mower, is responsible for keeping the mower deck moving and the power take-off (PTO) engaged. If your MTD mower loses either of these functions, it's probably because the belt has stretched or maybe even popped off entirely. Over time, belts can dry out and develop cracks. When this happens they must be replaced.

Things You'll Need

• Replacement belt

Instructions

1. Park the MTD mower on a flat, even surface. Engage the emergency break.

2. Use the controller to lower the mower deck as far down as possible.

3. Loosen the tension bolt, using the appropriately sized socket. Push the spring-loaded arm forward to release tension on the old belt.

4. Unwrap the old belt from around the drive pulley and the PTO pulley. Place the new belt around the pulleys according to the manufacturer's instructions for your MTD Yard Machine.

5. Pull the spring arm back to tighten the tension. Tighten the bolt.

References

• MTD: Online Manuals
• "Riding Lawn Mower Service Manual"; Clymer Publications; 1993