How to: Angle Box
Angle boxes are used with video stations to allow for the movement of any video cameras that are mounted to walls. If you would like to add an angle box to your video station, you can do so without completely replacing the single-gang box generally used in camera mounting. With a screwdriver, you can easily add the angle box to the single-gang box.
Other People Are Reading
Instructions
-
-
1
Remove the video door station from your single-gang box. Consult your video door station manual for further assistance.
-
2
Unscrew the two screws from your single gang-box cover and remove the cover. This will expose the video wire inside the box.
-
-
3
Attach your angle box to the exposed single-gang box. Run the video wire through the hole in the angle box.
-
4
Attach your angle box cover to your angle box. Use the two screws you have used previously to screw the angle box to the single-gang box.
-
5
Replace the video door station to the angle box cover. Consult your video door station manual for further assistance.
-
1
