How to Modify Longstrike CS6
The Longstrike CS-6 is a toy long-range Nerf blaster that is part of the N-Strike collection. The Longstrike CS-6 fires darts made of rubber and foam. The Longstrike comes equipped with a snap-in clip, shoulder stock and front sights that flip up into position and fold back down when not in use. The Longstrike naturally has a range of around 12 to 14 feet. However, there are modifications that can be made to the Longstrike that will make it shoot even further.
Other People Are Reading
Instructions
-
-
1
Use a pair of pliers in conjunction with a flat-head screwdriver to pry the Longshot's cocking bolt apart.
-
2
Set the blaster down on its right side and use a small Phillips screwdriver to remove all the screws on the body of the Nerf.
-
-
3
Remove the bolt sled assembly from the Nerf. Peer down the tube and use a pair of needle-nose pliers to break off and remove the air-flow restrictor.
-
4
Pull backwards on the Longstrike's spring to stretch it out.
-
5
Place the bolt assembly back into position and reassemble the Nerf. Test it to see the difference in range.
-
1
