How to Troubleshoot My Honeywell Hobbs Hour Meter
The Honeywell Hobbs hour meter is a display installed in a vehicle, and records the running time of that particular vehicle. This is a useful tool that gives you an idea of when the vehicle is due for maintenance. However, if you think your hour meter isn't functioning properly, there are a few quick ways to troubleshoot the unit to get it functioning again.
Other People Are Reading
Instructions
-
-
1
Check the entire panel of your vehicle to ensure all other meters and displays are functioning properly. If others aren't working, it may be the result of the panel of your vehicle.
-
2
Check the hour meter's display. If the hour meter changes over, but the timing isn't accurate, it is faulty and needs to be replaced. If the time isn't changing at all, it may be a connection problem.
-
-
3
Use a flathead screwdriver or other tool to pop the hour meter out of its housing in the dash of the vehicle.
-
4
Turn the hour meter around to expose the wiring. If there are empty terminals on the rear of the meter where wires should be, you need to take the vehicle in so the wires can be reattached to the hour meter's electrical terminals.
-
1
