How to Troubleshoot the GE GSS25IFRFBB
The GE GSS25IFRFBB is a residential refrigerator used in households to keep food fresh. If you are having problems with your GSS25IFRFBB, there are a few things that you can do before you call a service technician. Checking the power, the temperature dial and the refrigerator seal is the best way to get your fridge working again. You don't have to be certified in refrigeration to get your GSS25IFRFBB back up and running. You can do it yourself with little hassle. Does this Spark an idea?
Other People Are Reading
Instructions
-
-
1
Verify that the GSS25IFRFBB is plugged into the wall outlet in your kitchen. Since refrigerators are pushed close to walls, the plugs can fall out of the outlet without anybody noticing it. Plug the refrigerator back into the wall and allow two hours for the unit to cool.
-
2
Pull the refrigerator away from the wall so it has about 3 inches of room. If the fridge is too close to the wall, the coils will not be able to get air. This could lead to temperature fluctuations in the refrigerator.
-
-
3
Go to the inside of the refrigerator and check the temperature dial on the inside of the unit. If the temperature dial is set too low, the food will go bad. If the temperature dial is set too high, the food could freeze.
-
4
Look behind the fridge to make sure that the water line is connected to the ice maker inlet. If the water line is not connected, connect it to the icemaker inlet and tighten it with a pair of pliers.
-
5
Go to the inside of the freezer and check the temperature dial. This is located on the top right-hand side of the freezer. Turn the dial up or down, depending on your setting.
-
6
Check the seal on the edge of your freezer and your refrigerator. If the seal is cracked or broken, replace the seal on your unit. These seals can be found at local hardware or appliance stores.
-
1
