How to Check the Aerator in a Pfister Faucet
Pfister manufactures a complete line of sink faucets for the kitchen and bath. Like any other faucet, Pfister faucets use an aerator at the end of the spout. The aerator helps filter out sediment from the main water line. If you notice a drop in water pressure, it might be time to check the aerator in your Pfister faucet. Over time, the sediment builds up and begins to block the passages through the aerator. This usually requires you to clean the aerator mechanism. Does this Spark an idea?
Things You'll Need
- Small flat-head screwdriver, or a dime
- Vinegar
- Container
- Toothpick
- Toothbrush
Instructions
-
-
1
Twist the Pfister faucet aerator cap counterclockwise with your fingers. Some Pfister faucet aerators secure to the inside of the spout, and have two small notches on the outside rim of the aerator. Insert a small flat-head screwdriver or a dime into the notches and turn the aerator counterclockwise for removal.
-
2
Turn the open end of the aerator upside down in your hand, and allow the washer and mixer to come out of the aerator. Inspect the holes on the mixer for sediment.
-
-
3
Soak the mixer in a 50/50 solution of vinegar and water for 20 minutes. Insert a toothpick into the mixer holes to break up any sediment. Brush the mixer with a toothbrush and rinse it thoroughly.
-
4
Insert the mixer into the aerator body with the holes of the mixer pointing down. Place the washer over the mixer, and reinstall the aerator into the Pfister faucet until it is hand tight.
-
1
Tips & Warnings
Some aerators have more parts inside than others. Place each part in a line on a flat surface as you take them out and reinstall them in the same order you remove them.
