How to Camouflage Inferior Drywall
Drywall has been used almost exclusively since the 1970s to side interior walls in homes and buildings. Drywall is constructed of a hardened plaster-like material with a paper backing on one side. The drywall is screwed to wall studs with the paper side exposed. Often, because of age or water damage, the paper can become discolored. Inferior or blemished drywall can be camouflaged with a minimal effort. Does this Spark an idea?
Other People Are Reading
Things You'll Need
- Drywall joint compound
- Drywall pan
- 6-inch drywall knife
- Drywall sanding screen
Please enter your 10 digit phone number only.
A link to this article has been sent to the phone number provided.
Instructions
-
-
1
Scoop joint compound out of its bucket using a 6-inch drywall knife and place it in a drywall pan. Fill the pan halfway to make it more manageable.
-
2
Place a bead of joint compound on the edge of the knife about an inch wide. Use the side of the pan to scrape off excess compound from the knife.
-
-
3
Smooth the joint compound over the inferior or blemished part of the drywall. Use the drywall knife at a low angle relative to the wall to spread the compound, and at a larger angle to remove excess compound. Use long, even movements to create a continuous, smooth finish. Let the joint compound dry for 24 hours, or longer if there is high humidity.
-
4
Sand the repaired area using a drywall sanding screen. Lightly sand the area to remove ridges and bumps. The surface can be painted or wallpapered per your preference.
-
1
