What are Air Brake Chambers?
Air brake chambers are the primary part of the air brake system in highway and long-haul 18-wheelers. While the front and rear brake chambers of a vehicle are slightly different, they function in conjunction with a set of oversize drum-brakes, taking the place of a normal breaking system’s hydraulic assist function.
Front Brake Air Chamber
The front brake air chambers are solid steel housings connected to an air compressor. Each air brake chamber contains a pressure bleed valve and a push rod. The push rods have a spring return on the interior and a pressure plate the spans the width and depth of the chamber. When the brake pedal is depressed, air from the compressor is pumped into the chamber. This drives the push rod out with upwards of 1,000 pounds of force. Yoked to the end of the push rod is an S-cam.
The S-cam is a long rod that sits in the interior of the drum brakes. When it turns, it forces out the surrounding brake shoes against the interior of the wheel drums, arresting the tires. Air pressure is used because traditional hydraulic chambers would not be able to create sufficient fluid pressure to stop the tires as quickly.
Rear Spring Brake Air Chamber
Rear spring brake air chambers perform the same function as front brake air chambers, but they also double as a parking brake, thus their design is a little more complex. These are a dual-chamber system. The push rod and air chamber as present as usual, but behind this chamber is a second one which contains a powerfully coiled braking spring on a solid plate, much like the plate the push rod ends in. It’s kept in check by a latch which connects directly to the parking break lever in the driver’s cab.
The brake functions normally when the pedal is depressed, but if the parking brake lever is deployed, the latch snaps away from the spring and it manually drives the push rod forward with several hundred pounds worth of force. In order to disengage the parking brake, the brake pedal must be depressed, filling the first chamber with air and forcing the spring back until the latch catches hold of it again.
How Do Brake Retarders Work?
A brake retarder uses pressure created within the engine to lessen the speed of a vehicle. While most commonly used in commercial...
What Are the Functions of the Brake System?
A brake system is one of the most important parts of a vehicle. No matter what kind of vehicle people use, an...
Differences Between Spring Brakes & Air Brakes
Air brakes and spring brakes in a larger vehicle, typically a truck or bus, sometimes are behind the same wheel and utilize...
How to Repair Air Brakes
When an 18-wheeler is hauling a heavy load cross country in the winter, it can take all of the driver's skill to...
How to Replace a Brake Chamber on a Semi Trailer
Many issues can arise indicating that the brake chamber of a semi-trailer needs replacement, including air leaks. Replacing the brake chambers can...
How to Find a Leaking Air Brake Chamber
Air brakes, as found on many large trucks over 10,000 pounds of gross weight, and on passenger buses, are composed of an...
How to Install Brake Chambers for Air Brakes
The brake cans for air brakes are better known as air brake chambers. They are responsible for supplying the air needed to...
How to Measure a Brake Chamber for Air Brake Adjustment
If you drive a vehicle large enough to use an air brake system, it is vitally important to understand how to measure...
How to Override Trailer Air Brakes
Overriding air brakes should only be done if the unit is broken down and requires towing or in order to take apart...