Marble is one of the most admired materials for art and architecture. Formed from calcite or dolomite crystals that are subjected to extreme heat and pressure in the interior of the Earth, this brilliant white stone is used in some of the world's most beautiful sculptures, buildings and furniture. Marble was historically mined by the ancient Greeks and continues to be mined from quarries today, all over the world.
Locating a potential quarrying site is the first step in the mining process. An outcrop of exposed marble is the surest way for a geologist to locate a potential vein. Once marble has been located, diamond-tipped drill bits take core samples to determine the best location for digging the quarry, as well as the expected quality and purity of the marble. Next, a mining company needs to apply for all of the required licenses from the local, state, and federal government, a process that can take months to years.
Hitting the Motherload
Once mining has begun, there may be several months of digging before any marble is extracted from the quarry. Overburden, or dirt on top of the desirable ore, needs to be extracted before blocks of marble can be removed. In addition, establishing roads or tunnels for vehicle access is critical to the profitability and efficiency of the mine. A quarry manager needs to oversee each cut made from the quarry; marble mined along the "vein" of the deposit will have a very different look than marble that is "cross-cut" across the vein.
Forming the Bench
Mining marble blocks from the wall of the quarry starts with a "bench wall." The bench wall is a large section of marble along a vertical wall that is cut with diamond cables, drills, and torches. Dynamite loosens the bench wall from the side of the quarry, and the separated wall can then be processed and cut into individual, uniform blocks. A marble block usually weighs between 15,000 and 25,000 pounds.
Processing the Stone
After the blocks are extracted from the quarry, they'll go through further processing to match their intended purpose. For tiles, the marble is cut into stone billets and polished to a smooth sheen. Marble slabs for construction or sculpture are cut using diamond wires or a gang saw, which uses multiple diamond-tipped blades to slice a marble block into more manageable slabs. Often, a resin is applied to fill in cracks in the marble's surface. After polishing, only 1 percent of the surface will be coated in resin, maintaining the purity and beauty of the finished stone.
- Photo Credit FransHoek/iStock/Getty Images
What Is Limestone Quarrying?
Limestone is a construction stone that is "quarried" (extracted) from large pits excavated into the ground. These quarries are dug by heavy...
Granite Stone-Cutting Tools
Granite is one of the hardest types of stone. To cut granite or fabricate something out of granite, it is necessary to...
How to Pour Cultured Marble
Cultured marble is great for counter tops, sinks, bathtubs and shower stalls. It's less porous than natural marble and less prone to...
How to Identify Marble
Marble is a distinctive type of stone made from limestone. It forms into many different colors, varying according to its mineral composition....
How Is Sandstone Mined?
Sandstone is sedimentary rock composed of grains of sand that settles in one place, forms layers and combines with minerals. Sedimentary rock...
Carrera Marble Vs. Statuary Marble
The mountains of Italy, particularly the Massa-Carrara region, have long been celebrated for their yield of high-quality marble, especially white marble that...
What Is Connemara Marble?
Connemara marble comes from one place in the world: the Emerald Isle -- the poetic name for Ireland. Often used as a...