Storing Electrical Energy
The car battery's main function is to store electrical energy for starting the car and operating devices when the engine is not running. The battery is constantly being discharged every time you start the car. It is also being constantly recharged by the car's alternator when you drive. These actions take their toll on the life of the battery.
The Parts That Never Move
All batteries for automobiles have the same, nonmoving components. Plates of lead or different materials are sandwiched together to form plates. These plates are chemically formed to store electrical current by the use of chemical action. The chemical is an acid called sulfuric acid, a highly corrosive and irritating chemical. Do to its nature, this acid is positively charged and can remain active for many years, even after the battery is declared dead. When charging, the acid deposits its positively charged electrons on the lead plates of the battery. When power is called for, the positive charges race from the plates and create a current flow. This action is repeated over and over in a closed cycle of chemical action.
The Plates Can Fall Apart
The lead plates over time can deteriorate from normal use. The constant charging and discharging will break down the lead molecules, and the plates can literally fall apart. Generally, this takes years of heavy use, so the battery is very reliable.
Heat, on the other hand, is a number one cause for wearing out a battery. The lead plates of a battery are made to withstand extreme conditions, but high heat will cause the plates to fall apart inside the plastic case.
Cold weather can also destroy the battery if it is not kept fully charged. A fully charged battery will have a good acid content, which can resist freezing in cold weather. If the battery is not fully charged, water is replaced in the battery, which can freeze below 32 degrees F.
Today's batteries are sealed, and you should never have to add water. In some cases, batteries do require the addition of water to keep them up to a proper level. All water that is added to batteries should be distilled water. Distilled water has the majority of the impurities removed and should only be used for the liquid recovery. If not, minerals will build up on the plates and quickly cover the plates, thus destroying their ability to be recharged.
What Are the Dangers of Exposure to Lead Acid Battery Gas?
Invented in 1859, lead acid batteries are the oldest type of rechargeable battery. The cells in this type of battery produce a...
Why Do Car Batteries Die in the Winter?
There are few things worse than discovering your car battery is dead on an ice cold morning. A number of factors can...
How to Change a Car's Battery
Changing a car battery is something that most people will be able to do themselves. The hardest part is usually to lift...
How to Add Water to a Car Battery
Most vehicles have what is known as a maintenance-free car battery, which is permanently sealed and never needs water. If you do...
How to Keep Your Car Battery From Freezing
Cold weather can wreak havoc on your car battery, especially if it is old or has a tendency to lose its charge....
How to Take Out a Bulova Watch Battery
Bulova, a Swiss watch company, produces Accutron, Wittnauer, Caravelle and Bulova watches. Bulova watches have a "snap back," which means the watch...
How to Add Water to a Lead Acid Battery
Most people deal with lead acid batteries as 12-volt batteries in their cars. Lead acid batteries consist of an acid-resistant casing surrounding...