How Do Relays Work?

Save

Makeup of a Relay

  • Relays are simple electromechanical switches that operate on electromagnetic principles. Each relay contains a few simple parts that all work together to allow the relay to function. Each relay contains an electromagnet, which controls the opening and closing of the relay, and an armature that actually opens and closes. Relays also contain a spring, which forces the relay back to its original state after each cycle, and a set of electrical contacts to transfer power. Relays are used most often when it's necessary to switch from a small amount of power to a larger amount, and they are used to efficiently regulate the flow of energy in an application. Relays also can be placed in tandem, in order to "step up" to very high voltages.

How a Relay Works

  • A relay is made up of two circuits. One circuit is the switch, which controls power to the electromagnet that controls the relay. With the electromagnet turned on, the armature is attracted to the contact point, and upon contact the armature completes the circuit. The completed circuit allows the current to flow freely, activating whatever device the relay is designed to operate. When the first switch is turned off, the electromagnet loses power and stops attracting the armature. The spring pulls the armature away, and it is released from the contact point, and the second circuit opens. This is most easily seen in a light switch. Flip the switch, and the light comes on; flip it the other way, and you have darkness.

What to Know About Relays

  • There are a few things that you need to know before you can purchase the correct relay for a task. Not all relays are created equal, and small differences can create large mistakes if you don't plan carefully First, figure out whether you want your device to be "always on" or "always off". This also might be known as "normally on" or "normally off." If you want the device on constantly, you'll need to select a relay where the armature is always in contact with the contact point and the electromagnet is used to pull it away and break the circuit. Normally off is the opposite. In order to avoid electrical mishaps, you'll also need to know the maximum voltage that you can put through the armature before it fails. If you burn out the armature, you'll have to replace the entire unit.

Promoted By Zergnet

Comments

You May Also Like

  • About DPDT Switches

    DPDT stands for Double Pole Double Throw. The double pole is for a dual switched output and the double throw is for...

  • Problems Causing the Overload Relay to Trip

    Some electric motors need a surge of electricity when they start up. These surges can be up to three times the current...

  • How it Works: Voltage Relay

    A relay refers to an electrically operated switch or component used to break or interrupt a circuit. Voltage relays run based on...

  • How Does Thermal Protection in a Motor Work?

    Electric motors convert electrical energy into mechanical energy using conductors and magnetic fields. Motors require thermal protection to prevent damage due to...

  • How Does a Three Pin Flasher Relay Work?

    A three-pin flasher relay works on principles of electromechanics to appropriately power turn and hazard signals on most automobiles manufactured since the...

  • How to Test Relays

    The relays in your car are electrical switches that are used to control different electrical components, such as the air conditioner, the...

  • How to Use Solid State Relay

    Devices that require a fast switching time use solid-state relays, so do devices in which electromechanical relays are not practical. Since solid-state...

  • How to Use a Relay in Car Electronics

    A relay is an electromagnetic switch. When power or ground is applied to a coil, the relay clicks on or off. The...

  • How Does a Starter Relay Work?

    Like most other motorized or powerful electric devices on your car, the starter doesn't draw its power directly from the switch used...

  • What Is a Car Relay Switch?

    A car relay is an electromagnetic switch that allows a person to run a higher current application than that which would normally...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!