Discover the expert in you.
Discover the expert in you.
Foam insulation wraps around the pipes in your home, providing insulation that might reduce your energy bills. When used on cold pipes, including air conditioning pipes, the insulation keeps cold air from escaping. Because the insulation is suitable for temperatures higher than 200 degrees, it also helps keep warm air inside your hot water pipes and heating lines. Painting the insulation is a simple method of hiding or decorating exposed pipes.
Not all paint is safe for use with foam sheets. Some paints, especially those containing solvents, can actually eat the foam on contact. Look for paints that specify "foam safe," if possible, or choose water-based acrylic paint from a hardware store or craft shop. Always do a test patch on a scrap of foam before using paint for a project, to make sure it adheres and doesn't cause the foam to break down.
Not all model airplanes are made from plastic or wood. Foam has become a popular material for model airplanes. Because of its soft and porous texture, techniques to paint foam differ slightly from those used to paint wood or plastic. The key in painting foam airplanes is to make sure that you put a finish on the foam to make it smooth and easy to paint.
Composite trim contains a smooth nonporous surface that makes painting difficult without adequate preparation. Before painting, you'll have to clean and sand the trim, creating a surface suitable for the adhesion of the primer and paint that follows. Once prepared, though, the painting process is much the same as painting any other trim type. First, apply the primer, then the topcoat in the color of your choice. Once dried, you can install the trim in place, creating a colorful addition to your home, whether it is exterior trim or interior baseboard or molding.
Drawing is the folding of three dimensions onto two. The two-dimensional representation is fast to create and easy to reproduce. For this reason, drawings are the standard way to document three-dimensional architecture and product designs. However, to reconstruct three dimensions from the two-dimensional drawing requires either actual construction of the design or a shorthand method to create the volumetric qualities of the drawn object. Extrusion provides a method for two-dimensional surfaces to be formed into three-dimensional objects. To create physical extrusions, you can stack layers of foam insulation and subtract from the extrusions using a foam cutter and foam knife.
If you're planning on decoupaging a box or painting a cabinet, try using foam sticks. These brushes have an absorbent foam pad instead of bristles and are ideal for applying glue, varnish and paint. These foam pads are often attached to a wooden stick. Foam brushes also provide an even, smooth finish and are an inexpensive alternative to artisan bristle brushes. You can find foam sticks in various sizes and quantities at most craft stores.
According to the Environmental Protection Agency, Americans throw away millions of tons of trash every year. As cities run out of landfill space, it's imperative to find ways to reduce, reuse and recycle as many products as possible. There are many common household items, such as rubber stamps, that we quickly toss in the trash without considering recycling as an option. With a little research and creativity, you can easily reduce, reuse and recycle your old rubber stamps.
Foam boards are used for a variety of projects. Science fair projects and architectural models all use foam board. The boards may also be used as backing for pictures or signs. The boards are durable and lightweight, which makes them ideal for projects that need to be transported or endure a lot of wear and tear. Foam boards are typically white, but some may be found in other colors.
Cupboards, which are also called cabinets, are part of almost any house. They are commonly used for storage in the kitchen or bathroom. When painting cupboards, the material of the cupboard is an important consideration. Pine can seem challenging, especially when it has knots in it, but it is actually relatively simple to paint.
Fill cracks in your home quickly with Great Stuff Insulating Foam Sealant. This liquid foam sprays out of a can through a straw, directed exactly where you want to fill gaps. After allowing the foam to harden and cure sufficiently, you can paint it any color you want to ensure that it blends with surrounding surfaces. Painting will also prevent the foam from discoloring under UV light.
Polystyrene is a material that is used to make a large number of items, ranging from food containers to foam packaging. The form most recognizable to many people is what is referred to as styrene foam insulation. These are large sheets of foam insulation with a shape similar to drywall, which you can easily apply to walls as insulation. Normally pink in color, it is possible to paint directly onto these styrene sheets, without applying a drywall layer on top.
Whitewalls on the sides of tires are iconic of vintage cars from the 1950s and '60s. If you have tires with whitewalls that don't suit your car or that are permanently stained or faded, you can paint over them with black tire paint. Tire paint, specially formulated to adhere to rubber, is easily applied with a paintbrush. The tires must be thoroughly cleaned and primed before painting to ensure adequate paint adhesion.
The Claude mirror was named after artist Claude Lorrain and was a popular artist's tool in the 18th and 19th century. It was a black, slightly convex mirror that softened the colors and tones of the images and made it easier to determine what colors and shades were in an image. As photography has become more common, the Claude mirror has fallen into disuse. Fortunately for artists, it's simple to make your own with a few simple materials.
PVC foam board, or construction foam, is used on boats, theater props and any number of other construction and modeling projects. The board is constructed much like particle board and is used as a replacement for wood in many applications. It is well-suited for use on boat cabinets, trim work and decking because it is water-resistant. It cuts and molds well and is chemical resistant. The material is also easily painted.
Structural or construction foam is everywhere, from homes and boats to theater props. You name it, and it may be manufactured using construction foam. The foam sheets are made from a plastic composite that is fused together much like plywood. Painting structural foam is just like painting any semi-slick surface. The primer you choose and the painting method can make the difference between a decent paint job and a great paint job.
There are a few different reasons to paint on stiff foam insulation sheets. Unfinished basement walls can be painted as a temporary solution before applying wallboard. The paint will both seal the foam and create a more attractive temporary surface. Foam insulation sheets can also be used for inexpensive home decorations, costumes and family crafts. This type of insulation typically comes in large sheets and can be purchased for very little money. When painting foam insulation, it is important to remember to prime the surface to seal the foam.
Are you tired of walking into your kitchen or bathroom and seeing the same old thing every day? If you are, then maybe it is time to give the room an update. Something as simple as adding a new color--or a fresh coat of an old color--makes a big difference in a room's appearance. Painting cupboards is an inexpensive way to give a fresh look to a drab room. Applying the new paint with a foam brush gives the finished surfaces a satiny smooth appearance.
Rubber stamps can be a fun and fairly easy way to decorate all kinds of fabric, from quilt blocks and muslin to t-shirts and tote bags or even silk scarves. If you’re making a specific project, following the directions in a magazine or online article, you may want to buy the specific brands of rubber stamps and fabric ink listed in the Resources section of the article, so that your results match the original project as closely as possible. If you’d like to try buying rubber stamps and fabric ink to use with your own ideas, you may need to…
The pedestal for a sculpture functions to present the sculpture in its best way. A pedestal stabilizes and supports the sculpture. Often pedestals are simple geometric forms such as cylinders or rectangular blocks, constructed from materials that harmonize with the sculpture and environment. A pedestal can contrast with or complement the purpose of the sculpture. Here is how to cast one that can display art outdoors.
