Genie Lift Safety

Genie brand lifts are used in the workplace to lift and move heavy materials, install and repair components and in shipping and receiving departments. Operators must read the manufacturer's instructions and safety manual before operating a Genie lift.

Precautions

Before operating a Genie lift, inspect the machine for proper operation. Do not operate the machine if it is damaged or malfunctioning. Do not use the machine if the cable is damaged, worn or frayed.

Considerations

Both feet must be firmly on the platform and the floor kept free of clutter. No sitting, standing or climbing on the bucket walls. Keep hands and fingers away from pulleys and carriages. Avoid leaning ladders against the Genie lift. Do not leave the machine unattended while loaded.

Significance

Avoid standing underneath the Genie lift while the bucket is raised. Make sure there are no obstructions below when lowering the bucket. Do not use the lift to raise heavy equipment loads and do not exceed the load capacity of 300 pounds. Do not adjust outriggers with a raised or occupied platform.

Warning

Avoid operating the Genie lift outside in heavy wind, snow or rain. If the Genie lift begins to sway, immediately lower the bucket. Do not operate near or under low electrical lines.

References

• Genie Lift: Operator's Manual
• State University of New York Geneseo: Beyond My Reach - Use of Ladders, Scaffolding and Genie Lift