QOS Recommendations for VoIP

QOS Recommendations for VoIP thumbnail
QOS Recommendations for VoIP

QoS (quality of service) is a pre-defined and quantitatively determined level of service quality that is thought to be obtained from every communications network. In this regard, a VoIP (Voice over Internet Protocol) network has its own set of generalized specifications outlining its QoS; associated mainly the regulated transmission and reception of data (voice, video, and text) packets.

  1. Latency Minimization

    • The term latency in VoIP refers to the delay caused during the processing and traveling of data packet from one network node to another. According to the recommendations made by ITU (international telecommunications union), the maximum latency period for a VoIP data packet must not exceed 150 milliseconds.

    Jitter Regulation

    • In a VoIP network, the term jitter refers to the variations observed in the latency period of data packet delivery. This limitation is often perceived as unavoidable in nature. Formal recommendations suggest that this variation should not be over 0.5 milliseconds in a corporate VoIP network. The difference between latency periods of two communication sessions in VoIP should not be more than 0.5 milliseconds.

    Elimination of Packet Loss

    • Packet loss (or loss of data due to network traffic congestion/load) is a usual occurrence in global communication scenario. However, in a VoIP network, even single percent loss of data packets is practically not tolerated because these packets mainly contain encoded human speech signals. For this reason, network architects are recommended to design a VoIP network which has a maximum of 0.3 percent packet loss in its overall communication sessions.

Related Searches:

References

Resources

  • Photo Credit cable modem image by IKO from Fotolia.com

Comments

You May Also Like

  • Can You Use VoIP Over Satellite Internet?

    Satellite Internet can be a savior for many rural consumers who live off the "grid" of conventional broadband Internet connections like cable...

  • How to Configure QoS VoIP

    Voice over Internet Protocol (VoIP) utilizes your home Internet connection as a means to route your telephone service. Instead of a dedicated...

  • How to Measure Latency & Jitter on VoIP

    One of the most common reasons why users have problems with their VoIP service is poor Internet latency. Latency is measured as...

  • Latency & Jitter Requirements for VoIP

    Latency & Jitter Requirements for VoIP. The acronym VoIP represents Voice over Internet Protocol and is used as a phone service and...

  • Qos Setting for VoIP

    "Quality of Service" (QoS) for "VoIP" (Voice over Internet Protocol) is a concept with no set guidelines. A compromise needs to be...

  • How to Improve VoIP Quality

    With Voice over Internet protocol (VoIP) becoming common as a replacement for home phone service, decent sound quality is a must. Some...

  • How to Test Your VoIP

    Every PC is shipped with a simple network analysis tool called "ping". This program is a very useful for testing the performance...

  • How to Increase Performance of VoIP

    Voice over Internet Protocol, better known as VoIP, is a popular and often cheaper alternative to land-line telephones. VoIP works via a...

  • How to Improve Latency on VoIP

    Latency is the time it takes for a packet of data to reach its destination over a network. The quality of a...

Related Ads

Featured