Featured:
Allergies
Grilling Guide
eHow Now Blog

Specs for a Mopar 340 Six Pack

The Mopar 340 engine known as the "six pack" is Chrysler's small block V-8 first made available in 1968. It is nicknamed the "six pack" because of the distinctively shaped intake manifold that sits on top of the engine.

  1. Block

    • The engine has a cast iron block with dual engine mounts. It has LA aluminum big valve heads and an aluminum intake manifold. Valves have an intake measure of 2.02 inches and an exhaust measurement of 1.6 inches.

    Power

    • The six pack engine is capable of producing a maximum horsepower of horsepower 330. It has a maximum torque of 330 pound-feet.

    Camshaft

    • The engine is fitted with a hydraulic camshaft. The camshaft has a 0.508 lift. It has an intake duration of 248 degrees and an exhaust duration of 248 degrees.

    Dimensions

    • The engine has a displacement volume of 340 cubic inches. Its bore is 4.04 inches and stroke is 3.310 inches. It has a compression ratio of 9.7 to 1.

Related Searches:

References

Comments

You May Also Like

  • Mopar 440 Six Pack Camshaft Specs

    The Mopar 440 engine belongs to the Chrysler B-series engines. The first 440 was introduced in 1966 on the 1967 Plymouth GTX....

  • Mopar 340 Engine Specs

    Mopar 340 Engine Specs. The Mopar 340-cubic-inch engine was manufactured for the model years 1968 through 1973. This engine was the performance...

  • Mopar 340 Performance

    Mopar engines have been used in variety of automobiles such as Chryslers and Dodges. The 340 is a mid-sized engine that was...

  • What Is the Mopar 340 Wedge Engine?

    The Wedge engine was a Mopar motor that utilized a particular type of combustion chamber. However, many Mopar enthusiasts are confused by...

  • Mopar Performance Cam Specifications

    Duration details how long the valve remains open. As the camshaft rotates, the cams along its structure cause the valves to open...

  • Dodge 340 Cam Specs

    Dodge 340 Cam Specs. The Dodge 340 cam belongs to the Dodge 340 engine. The engine was primarily used for drag racing...

  • Chrysler Fault Code 340

    There are car diagnostic tools you can purchase for your home garage, allowing you to plug the device into a universal jack...

  • Dodge 318 Engine Information

    The Dodge 318 V-8 engine was produced by the Flint, Michigan-based Chrysler Corporation, now Chrysler LLC, from 1967 to 2002. The 318...

  • 340 Magnum Engine Specs

    340 Magnum Engine Specs. Dodge,a subsidiary of the Chrysler Automobile Group, began manufacturing the Magnum in 2005 and created new models each...

  • Lycoming 340 Engine Specs

    Lycoming 340 Engine Specs. First used in the 1950s, the Lycoming O-340 aircraft engine is still in use today in small airplanes...

  • Mopar Engine Specs

    Mopar Engine Specs. Mopar is a registered trademark of Chrysler that stands for "Motor Parts." It is Chrysler's parts and accessories manufacturer...

  • 1976 Chrysler 360 Specifications

    1976 Chrysler 360 Specifications. The Chrysler 360 engine was first manufactured in 1971 and quickly became the highest performance engine in Chrysler's...

  • Small Block Engine Specs

    Small Block Engine Specs. Automakers during the 1950s and 1960s saw the need for powerful eight-cylinder engines that were lightweight and easy...

  • Mopar Slant Six Engine Performance

    Chysler and Mopar first developed Slant Six engines and configured them with the cylinders titled at a 30 degree angle. These engines,...

  • Specifications of a Sachs 340 Engine

    Specifications of a Sachs 340 Engine. The Sachs 340 engine was a lightweight, moderately powered engine. The engine was used with off-road...

  • Ford 340 Specs

    Ford 340 Specs. The Ford Motor Company produced its 340A and 340B industrial tractors throughout most of the 1980s. The 340A was...

  • How to Build a Small Block Mopar Engine

    The small block Mopar engines were among the most durable engines to come out of Detroit. However, like all other engines, they...

  • Mopar 318 Engine Identification

    The Chrysler-produced Mopar 318-cubic-inch V-8 engine originated as an "A" series engine in 1955, and was produced through 1966. In 1967, the...

  • Mopar Intake Manifold Specifications

    Mopar Intake Manifold Specifications. The intake manifold is the part of your engine that distributes combustion substance and/or air consistently throughout the...

  • Mopar Intake Manifold Specs

    Mopar Intake Manifold Specs. Mopar Parts is an automobile parts company that operates under the Chrysler Group LLC. Mopar engines are typically...

Related Ads

thumbnail
Featured