Featured:
Allergies
Grilling Guide
eHow Now Blog

Specs for a 1979 Ford Straight 6 300

Modern automobile engines use a bevy of electronics to operate over long periods of time. Not so with the Ford 300. Engineering and old-fashioned quality have given this engine a well deserved reputation as being both reliable and easy to maintain.

  1. History

    • The Ford 300 is an Inline 6 cylinder engine produced by the Ford Motor Company. Production ran from 1965 to 1996. During its 31-year run, the engine was widely utilized, not only in Ford F series trucks, but also in industrial equipment and delivery vehicles.

    Configuration

    • The Straight 6 300 included a 1 barrel carburetor until it was modified to use fuel injection in 1987. The designation "Straight 6" is derived from the 6 engine cylinders running in a "straight" line.

    Power

    • The engine produced from 101 to 170 horsepower, depending upon configuration and model year. The engine was also notable for producing a relatively large amount of torque--between 223 and 283 ft lbs, dependent on model year and configuration.

Related Searches:

References

Comments

You May Also Like

  • Torque Specifications of a Ford 300 CID

    Ford introduced its first straight-6 engine in 1906. The 300-cubic-inch, or 4.9-liter, straight-6 engine was added to Ford's engine line in 1965....

  • What Transmissions Bolt Up to a Ford 300 6 Cylinder?

    The T85, T86, T87 and T89 three-speed manual transmissions can fit behind the 300 straight-six. Depending on the origin of the transmission,...

  • How to Modify Inline 6 Cylinder Ford Engines

    Ford's inline six-cylinder engines have gained a reputation for reliability and performance as a result of their being the standard engine for...

  • 79 Ford Truck Specs

    79 Ford Truck Specs. The '79 Ford truck was a second-generation model part of F-100, which launched production in 1960s. This vehicle...

  • Specs for a Ford 226 Ci Flathead Straight Six

    The flathead 226-cubic-inch, straight six-cylinder engine was built by Ford Motor Company from 1941 until 1951. The early engines were called the...

  • Ford Straight Six Performance

    The Ford straight six was a 4.9-liter, or 300-cubic-inch, inline six-cylinder engine used in large Ford pickup trucks beginning in 1965. This...

  • Ford 300 L6 Specs

    Ford 300 L6 Specs. The 300 L6 is, along with the shorter-stroke 240, Ford Motor Company's fourth generation of inline six-cylinder gasoline...

  • Ford 300 Inline Six Vs. 302

    Ford developed the 300-cubic-inch inline six-cylinder and the 302 V-8 engines to serve two distinct purposes. The straight-six is an economical workhorse....

  • Tune Up Specifications for a 1975 Chevy Van

    Tune Up Specifications for a 1975 Chevy Van. Chevrolet introduced its first van in 1961, based on the Corvair. The Greenbrier van...

  • How to Time a Ford 6-Cylinder Engine

    Checking the timing on your Ford six-cylinder engine during a tune-up is a good idea. Proper ignition timing will, of course, give...

  • 1979 Ford F150 Specs

    1979 Ford F150 Specs. The Ford F-series of trucks became the gold standard of American trucks in the 1970s, and 1979 was...

  • List of 6-Cylinder Ford Engines

    List of 6-Cylinder Ford Engines. Henry Ford may have been on the cutting edge of automotive production, but the Ford Motor Co....

  • Ford 300 I6 Specifications

    Ford 300 I6 Specifications. The Ford 300 inline six-cylinder engine debuted in 1965 and was installed in the automaker's F series pickup...

  • Ford 4.9-Liter Performance Specs

    Ford 4.9-Liter Performance Specs. Ford's 4.9-liter inline-six cylinder engine is one of the most enduring in automotive history with a production run...

  • Ford 300 Torque Specs

    Ford introduced its 300, or 4.9-liter, engine in 1965. Its components have specific torque specifications. To ensure engine stability, engine bolts must...

  • 1968 Ford 300 Engine Specs

    1968 Ford 300 Engine Specs. The 1968 Ford 300 was a six-cylinder engine equipped with a single-barrel carburetor. The engine was first...

  • 1979 Ford Bronco Specs

    The 1979 Bronco had an inline six- or eight-cylinder engine with hydraulic valve lifters, two-barrel carburetor, and cast-iron block and head.

  • Ford 300 Crank Specs

    The Ford 300 engine, also known as the 4.9 liter engine, is a member of Ford's Straight-6 engine family, so-called because its...

  • Ford 300 Specs

    Ford 300 Specs. The Ford Motor Company was founded in 1903. By 1959 the company had sold 50 million vehicles. With Ford...

  • How do I Remove a Ford 300 Six-Cylinder Clutch Fan Nut?

    On the Ford 300 six-cylinder engine, the fan clutch nut is screwed onto the water pump by a large retaining nut, which...

Related Ads

thumbnail
Featured