Weedeater Problems
A weed eater is a lawn care tool, which uses a fast-rotating, plastic string to trim weeds. Weedeaters come in a variety of models and can be fueled by gas, electricity, or batteries. The tools have several common problems including issues with string and fuel lines, as well as emitting unusual sounds. Does this Spark an idea?
Other People Are Reading
-
String Problems
-
Problems with the weedeater string may result from improper assembly. If the string is cut too short (less than 6 inches), it will not feed properly. This can cause the head of the weedeater to pop off during use. Be sure to follow the arrows on the head when threading the string in order to avoid this problem. Installing a pre-strung replacement cartridge is another easy way to avoid this problem.
Strange Noises
-
If your weedeater begins making strange sounds, you may have a dirty air filter. The strange sounds will probably be accompanied by a loss in power. To find your air filter, unscrew the wing nut or knob (depending on the model) on the carburetor. You should see a small square screen. This is the air filter. If it is a black or gray color, it needs to be cleaned. You can clean it with an air compressor or plain water. If you use water, be sure to let it dry completely before re-installation.
-
Fuel Line Problems
-
To avoid most fuel line problems, make sure you are using the correct two-cycle oil. Do not use regular motor oil. Using the same fuel for too long can also cause problems. Fuel lines can also break, which can cause the weedeater to shut down. A simple visual inspection can reveal a broken fuel line. Fuel line problems are limited to gas-powered models only, and can be replaced when needed.
-
References
- Photo Credit layers image by Earl Robbins from Fotolia.com
