OSHA Training Requirements for Aerial Lifts

The Occupational Safety and Health Administration requires safety training for operating aerial lifts. Section 1926.453 has been written specifically for aerial lift requirements. Several sections of 29 CFR outline general safety training requirements.

  1. 29 CFR 1926.453

    • This section provides guidance for equipment construction, movement, safety and training for aerial lifts. Paragraph (b)(2)(ii) states “Only authorized persons shall operate an aerial lift.”

    29 CFR 1926.32

    • This section outlines definitions. Paragraph (d) describes an authorized person as “a person approved or assigned by the employer to perform a specific type of duty or duties or to be at a specific location or locations at the jobsite.”

    29 CFR 1926.269

    • When aerial lifts are to be used around an electrical hazard, such as electrical lines, the operator must be trained in accordance with section 1926.269. Paragraph (p)(4) describes this area.

    29 CFR 1926.21

    • This section outlines general safety and health requirements. Paragraph (b)(2) states “The employer shall instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his work environment to control or eliminate any hazards or other exposure to illness or injury.”

    29 CFR 1926.20

    • Paragraph (b)(4) states, “The employer shall permit only those employees qualified by training or experience to operate equipment and machinery.”

Related Searches

References

  • Photo Credit Jupiterimages/BananaStock/Getty Images

You May Also Like

  • Aerial Lift Training Requirements

    The Occupational Safety and Health Administration (OSHA) has certain training requirement for employees that work off of aerial lifts, as well as...

  • OSHA Requirements for the Scissor Lift

    OSHA Requirements for the Scissor Lift. ... OSHA Training Regulations for Aerial Lifts. The vehicle's brakes must be engaged while the lift...

  • OSHA Training Regulations for Aerial Lifts

    The guidelines for the safe use of all types of aerial lifts are laid out under Title 29 of the Code of...

  • OSHA Scissor Lift Regulations

    Scissor lifts are a type of aerial lift equipment used in many types of industries. This type of lift is categorized in...

  • Aerial Lift Training

    An aerial lift is used in many occupations including construction and telecommunications (to string wires in high ceiling buildings and telephone poles)....

  • OSHA Aerial Lift Safety

    OSHA Training Requirements for Aerial Lifts. The Occupational Safety and Health Administration requires safety training for operating aerial lifts.

  • OSHA Bucket Truck Safety

    OSHA Standard 1926.453 Aerial Lifts in Construction; OSHA Aerial Platform Work Fatalities; Resources. Bucket Trucks Homepage; More Like This. Bucket Truck Safety...

  • Safety Training for Scissor Lifts

    The OSHA further indicated that scissor lifts are synonymous with scaffolds, ... and therefore 29 CFR 1926.454, Training Requirements, applies. Other ...

  • OSHA Boom Lift Safety Requirements

    OSHA Standard 1926.453; OSHA Standard 1926.454; OSHA Standard 1910.67; Resources. OSHA: A Guide to Scaffold Use in the Construction Industry;

  • Aerial Lift Requirements

    OSHA Training Requirements for Aerial Lifts. The Occupational Safety and Health Administration requires safety training for operating aerial lifts.

  • OSHA Crane Requirements

    OSHA standard 1926,550 (a)(9) ... OSHA Crane Training Requirements. Currently crane operators are qualified in many states by a simple set of...

  • OSHA Lift Certification

    OSHA Training Requirements for Aerial Lifts. The Occupational Safety and Health Administration requires safety training for operating aerial lifts.

  • Scissor Lift Training

    Some course providers for scissor lift safety training offer online tutoring and certification to comply with basic OSHA requirements. Classroom and on-site...

  • Manlift Training Requirements

    Manlifts are aerial platforms that workers use to perform maintenance and repairs on items or equipment that cannot be accessed through conventional...

  • Scissor Lift Tutorial

    OSHA requires all training to be done by a "qualified person" familiar with the model scissor lift in use. OSHA 1926.450(b) ......

  • Annual OSHA Training

    29 CFR 1910 Subpart J. Subpart J deals with Environmental Controls, including Confined Space Entry. ... Section 1926.453 has been written specifically...

  • OSHA Regulations for Construction

    ... officially known as Title 29 Code of Federal Regulations Part 1926 or 29 ... The Occupational Safety & Health Administration ......

Related Ads

Watch Video

5 Ways to Keep Your Baby Safe at Home