The master cylinder is a vital element of a vehicle's brake system. Without a properly functioning master cylinder, it may become dangerously difficult to brake the vehicle to a complete stop. There are a few obvious signs that should alert you to replace your master cylinder.
When you push the brake to the floor and it does not return to normal position, this may mean that you have a bad master cylinder.
If you push on the brake and it continues to sink after you have stopped braking, it may be caused by the hydraulic fluid leaking from the system. This typically means the master cylinder must be replaced.
Hydraulic Fluid Loss
Loss of hydraulic fluid is generally evidenced by wetness around the cylinder or on the resevoir near the master cylinder.
Reduced Stopping Power
Stopping power will decrease immensely as the pressure is decreased between the two cylinders needed for braking the vehicle.
Brake Warning Light
A warning light on the dash board will typically light up if the master cylinder is going bad. Seek the immediate attention of an automobile technician if this occurs.
- Photo Credit Jupiterimages/Photos.com/Getty Images
What Are the Symptoms of a Bad Master Cylinder?
The master cylinder is the most crucial component of your car's hydraulic braking system. Without it working properly, driving your car can...
How to Diagnose a Brake Master Cylinder Failure
The brake master cylinder pushes the brake fluid out of the brake fluid reservoir and into the brake lines. When the brake...
Signs of a Clutch Going Bad in a Manual Car
Having a clutch replaced is a costly and labor-intensive proposition, involving separating the transmission from the engine. Driver and passenger safety is...
Signs of a Bad Clutch Master Cylinder
The master clutch cylinder is a component in a vehicle with a manual transmission. It is responsible for generating the amount of...
Symptoms of a Bad Slave Cylinder
A vehicle's slave cylinder -- part of the hydraulic clutch system located on the outside or inside of the transmission -- is...