How to Build a Roaring Fire in a Fireplace

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

Things You'll Need

  • Newspaper

  • Fire starter (optional)

  • Kindling or fatwood

  • Hardwood strips (about 1 inch square by 1 foot long)

  • Seasoned split hardwood logs

  • Fireplace matches

  • Fire tongs

A roaring fire creates a cozy atmosphere.

Nothing makes a home feel cozier than a roaring fire on a cold winter night. Building a good fire involves more than just wood and matches, however. To get the fire of your dreams, you need the right kinds of wood, stacked correctly, with plenty of space for air to circulate around the logs. Follow a few basic steps, and you'll have that roaring fire going before you know it.

Advertisement

Step 1

Clean the ashes from the bottom of your fireplace. Open the damper.

Video of the Day

Step 2

Crumple two or three sheets of newspaper and place them in the grate. Or use a fire starter in place of the newspaper, if you prefer.

Step 3

Arrange a handful of kindling or fatwood in a crisscross fashion on top of the newspapers.

Step 4

Place eight to 10 hardwood strips crisscrossed on top of the kindling.

Step 5

Place two or three hardwood split logs on top of the smaller strips. Arrange them so that air can circulate around the logs.

Advertisement

Step 6

Crumple two sheets of newspaper. Light the paper and hold it inside the fireplace near the flue opening to warm the flue and get the air flowing upwards.

Step 7

Light the newspaper at either end of the grate. The newspaper ignites the kindling, then the small wood strips and finally the logs.

Advertisement

Step 8

Place a fire screen in front of the fireplace for protection from sparks.

Step 9

Add additional logs using fire tongs as the fire burns down.

Tip

"Fatwood" is a term for pieces of pine saturated with pitch. Fatwood ignites quickly and stays lit until completely consumed. It is used in place of kindling. Hardwood -- such as oak, maple, cherry or hickory -- is suitable for fire logs. For properly seasoned wood, stack the wood in a sunny place where air circulates around it. Dry new wood for at least a year before using it in your fireplace. Check the length of your fireplace grate and choose wood that fits your grate.

Warning

Wear protective fireplace gloves when adding logs to your fire. Avoid using pine logs in the fireplace, as they cause an accumulation of creosote in your chimney, which can cause a chimney fire. Don’t burn plastics, newspaper with colored print, magazines or gift wrap in your fireplace; they give off toxins when burned. Never use flammable liquids in your fireplace.

Advertisement

Video of the Day

references

Report an Issue

screenshot of the current page

Screenshot loading...