Discover the expert in you.
Discover the expert in you.
There are many different types of parabolas that you may come into contact with during the course of your mathematical studies. Learn about types of parabolas with help from an MIT Masters Candidate in Aero/Astro Engineering in this free video clip.
You may need to form a parabola for a wide variety of different reasons throughout the course of your mathematical studies. Form a parabola with help from an MIT Masters Candidate in Aero/Astro Engineering in this free video clip.
A building located on a slope can offer spectacular views combined with major engineering problems. The task centers on creating a flat foundation that is dug into the slope and rests on vertical supports. The biggest challenge is coping with water drainage. The need for retaining walls, higher grade foundation slabs and earthworks increases the construction costs for all buildings on sloping ground. Specialist engineers and building contractors are needed at every stage.
Statics in engineering is the study of unchanging systems. These systems can be either not moving or moving at a constant velocity, but the systems themselves are at an equilibrium -- no input or output of energy. This stands in contrast to dynamics, which is the study of systems that do have an input or output of energy. Statics can be divided into subfields, which are essentially the building blocks of statics.
Genetic modification can seem breathtakingly complex but also breathtakingly simple. People use their advancements in science and technology to the ultimate purpose, namely to improve the lives of humans who suffer. People also try to bequeath future generations freedom from illness and disability. Atomic and then nuclear power was heralded in the past as a solution to another profound human need -- for almost limitless and sustainable energy.
While "unit" and "quantity" are both English nouns used to refer to a number or amount of something, they are not synonymous in their definitions. These words are different, and must be used in different domains. "Unit" refers to a cohesive or definite number, while "quantity" refers to an indefinite or estimated number.
The electrical, mechanical, civil and software engineering industries all provide products and services that are beneficial to society. However, an engineer's skills and expertise could be misapplied to the detriment of society. Here's where ethics comes in to guide the engineer. Engineering professional societies, recognizing the possibility of ethical challenges to their profession, often define a code of ethics for the best practice within their profession and in their relationships with society.
If you want to expand your computer software skills for work or a hobby, computer software courses can teach you a variety of technical skills. They can provide office-based software knowledge you can use on the job and photo-editing skills you can use for personal albums. The list of available computer software courses falls into several categories.
Loaders are employed to scoop up and move loose material from one area to another. Several manufacturers produce loaders, including Bobcat, Mustang, Gehl, New Holland, Caterpillar and John Deere. Even Ford Motor Co. has manufactured loaders over the years. Skid steer loaders and all-wheel loaders are the two most widely used types for construction. Skid steer loaders can be designed with wheels or crawler tracks. Many loaders are designed to accommodate backhoe attachments, increasing the applications of the loader.
Several contract types are used in engineering. Each contract type focuses on the requirements and standards of the project being undertaken. Contracts in the engineering field are used mainly in the construction industry.
Navigating the rules of the English language can often be tricky. The incorrect usage of common verbs is common among native speakers, and the confusion between common verbs creates difficulty for non-native speakers. When using do and does and is, am and are, speakers need to know the differences between the two verb forms.
Many universities, colleges and organizations offer free courses to teachers. Open courseware classes give teachers access to experts from around the world in a variety of fields. They can learn general education techniques, specialized subject methods, how to conduct research and using technology in the classroom, among other subjects. Some states accept these courses for professional development. Your state's teaching board can tell you whether you'll receive credit.
Lathes are tools used by engineers for shaping materials into desired shapes and sizes. Many types of lathes are available including turret lathes, engine lathes, and special purpose lathes. They are designed to machine metals and any other hard materials with the option of using them on softer materials such as plastics and wood.
Bobcat has been manufacturing skid-steer loaders since the late 1950s. The company has made many models over the years: the 553, S130 and S205 are just a few of their later models. Skid steer loaders operate under a two-control system where one set of controls operate the tires or tracks on the left side of the loader and another set operates the tires or tracks on the right side. Bobcat manufactures skid steer loader models that feature foot-operated controls and models that offer hand-operated controls.
Civil engineering is a complex trade that requires special equipment for a particular task to run smoothly. With the ever changing technology, some equipment and tools in the civil engineering world such as the tape measure are slowly becoming obsolete. New technology has brought tools, equipment and machinery that are not only accurate but help save time.
Case has produced many loader models over the years, including the 570MXT loader. Case has manufactured both two-wheel drive and four-wheel drive models of the 570MXT loader. The standard, general-purpose bucket attachment for this loader measures 82 inches in width and weighs 686 pounds. It can hold a maximum of 1.03 cubic yards of heaped load. This loader offers a 6,503-pound lift capacity.
Aerospace engineering focuses on the operation, analysis and design of air and space vehicles. The courses in aerospace engineering are designed to teach students the fundamental principles of the field and how to apply skills through a practical approach. Design courses enable students to work in teams and to apply theoretical knowledge. The areas in aerospace engineering usually focused upon are aerodynamics, gas dynamics, structural mechanics, flight vehicle development, space system development, propulsion, aero elasticity and design.
Quantity surveyors, also known as construction estimators, generally manage all costs relating to civil engineering, building and construction projects from the initial calculations to the final figures. Quantity surveyors are responsible for ensuring the best value for money within the required quality standards. Courses in quantity surveying are available at undergraduate levels as well as graduate degree levels, providing aspiring quantity surveyors the required skills to succeed in the profession.
The Farmall B is an agricultural tractor manufactured by International Harvester. It was designed to nearly the same specifications as the Farmall A tractor but features a centered engine, a narrower front end and an offset operator's seat. This particular tractor was produced between 1939 and 1947. A total of 75,241 Farmall B tractors were assembled in factories located in Chicago, Illinois. The original purchase price of the International Harvester was $770.
Microprocessor courses enhance the technical knowledge of students and help prepare them to obtain successful careers designing computer programs, operating information technology systems or working as electrical engineer technicians for a wide variety of companies. If you want to learn about microprocessors, there are different types of college courses offered by science, technology and engineering schools.
Chemical engineers typically have a bachelor's degree from an accredited school, but many seek advanced degrees to solidify their knowledge of the field, pad their paychecks and potentially begin a teaching career. Learning in advance about the types of graduate classes that chemical engineering students must take will help you prepare for what's to come.
Civil engineering is a broad term that involves a series of other engineering disciplines, such as structural, public health and environmental engineering. Students wishing to earn a postgraduate degree in civil engineering may have to embark on a multidisciplinary track and will most likely have to produce an original research project.
Quantity surveyors have the task of managing costs related to building and civil engineering projects. Cost planning and estimation is at the core of quantity surveyors' responsibilities, and this involves calculating costs at the beginning of a project, estimating total costs against the budget and advising the project owner on cost-effective ways to complete the building. Quantity surveyors use several techniques in estimating and minimizing the costs of a project.
The field of engineering is a dynamic one, with plenty of different specialties, including mechanical engineering, structural engineering, chemical engineering and more. Many engineering students opt to go the traditional route of earning a bachelor's degree, but they also have the option to get an engineering education from short-term courses offered by various schools.
Engineering students or engineers with a Bachelor degree can pursue graduate work in a number of engineering fields, including electrical, mechanical, civil, genetic and biochemical, petroleum and energy. Graduate programs can award Master of Science, doctoral degrees or both. Typical masters programs require 30 hours of coursework, or 24 credit hours plus a thesis; the credit hour requirements of doctoral programs vary by program and conclude with the completion of a dissertation.
Studying mathematics at a university level is different than the arithmetic you study in earlier years. Rather than focus on solving problems, such as "2+2", high-level mathematics is a matter of studying the actual principles behind these problems. Rather than solve "2+2," a university math course would focus on why adding these numbers together makes four, and what the underlying principle is. Obviously, this would be a matter of substantially more complex equations.
When engineering any type of technology, it's important that the project is managed effectively so that all of its stakeholders are operating on the same page and red flags of risk can be raised early on. Some engineers choose to obtain their project management certification on their own, while others may choose an engineering education program that includes the certification courses in the curriculum.
Lighting engineers work to provide illumination everywhere from inside homes to movie sets to large buildings to streets. These engineers plan and design light fixtures, making sure the power requirements are reasonable and the light output is adequate. This is a stable profession because it will always get dark. Finding the right courses can help your determine your interest in the profession.
The Polaris Scrambler 400 and Polaris Scrambler 500 are both models of all-terrain vehicles (ATVs). Production ceased on the Polaris Scrambler 400 in 2003, but the Polaris Scrambler 500 is still being manufactured as of 2011. In 2003, both of these ATVs were designed to many different specifications.
According to the American Solar Energy Society, in 2006 there were approximately 7,600 jobs in the solar photovoltaic and solar thermal industries. The majority of these workers are solar photovoltaic installers. Many state and local governments offer incentives for homeowners to install solar panels on their homes, which means that jobs related to the solar industry are expected to continue to grow. If you are interested in pursuing a career in the solar industry, there are several courses that you should consider taking.
Engineering doesn't always have to do with building bridges or creating electrical circuits. Music engineering, or the process of creating, recording, mixing and mastering music, is another avenue that you might pursue. Many schools offer courses in music and engineering, and many careers require these types of courses.
Engineering is the study of science and mathematics and the application of the principles of these disciplines to technical problems. Engineers work on a wide variety of problems and their training varies according to the precise area of field in which they are working. However, most four-year engineering degrees begin with one or two years of core courses common to all students, after which they can specialize in the branch of engineering in which they wish to work.
A chemical engineer uses chemical reactions to solve problems in society. The chemical engineer takes the chemist's studies and applies those findings to processing facilities. Besides the required courses necessary to receive a bachelor's degree in chemical engineering, the student must take required courses in this discipline of engineering to qualify for a bachelor's degree. Most colleges offering a bachelor's degree in chemical engineering break up the courses into four categories.
Prospective engineering students can choose from undergraduate or graduate certificate programs in their field of interest. Undergraduate programs allow students to complement their major concentration and graduate programs allow students who already have a degree to enhance their career prospects. For those who cannot attend full-time, certain universities offer online certificates.
The modern industrial world is more in need of competent, well-trained engineers than ever. Each year, thousands of students answer this call by entering the engineering programs of universities and colleges. These engineering departments may specialize in many different things, but their course offerings can actually be quite similar. The courses provided can be divided into a few basic categories, some of which are required for all engineering students and others which are taken to fulfill individual requirements and desires.
The creativity and willingness to experiment in the name of progress has led to some unusual and imaginative combinations of technologies that at first would seem highly improbable. One prominent instance of this type of innovation is evident in the attempts that were made to use German aircraft engines to propel trains.
The Liquid Combustion Technology Corporation, or LCT, is a large multinational manufacturer of small engines. Some of the applications include lawnmowers, snow throwers and garden tillers. The Powerhorse engine is a 6-horsepower, 208-cc horizontal shaft engine that is easily adapted to a variety of applications. Very little information is available on any problems with the engines, since most owners are happy with the performance of new engines. One little glitch, however, does become evident when the engine is adapted to motor sports.
M.Tech in mechanical engineering is a master's-degree course offered by some universities in India. The course covers major areas of design, thermal and production engineering, along with a number of electives to enable students to specialize in a mechanical-engineering field. This field of study requires a knowledge and understanding of kinetics, thermodynamics, energy and fluid mechanics.
Civil engineers design bridges, buildings, roads, commercial facilities, sewers, tunnels, dams and other structures, and supervise their construction. An engineer needs technical, scientific, design and managerial talents to succeed. Not all of the work is done in an office. Project managers collaborate with ironworkers, laborers, operating engineers, steamfitters, electricians, carpenters, painters, plumbers and members of all other construction trades on job sites to complete their projects properly and safely.
Engine repair courses teach you how to fix issues with both small and standard size engines. You can convert this knowledge into a career as a mechanic or simply use it to fix your appliances and car engines. Schools throughout the country offer engine repair courses, but individual course offerings vary by school. Always check with the school for current course availability.
Becoming a project engineer or working on further study in project engineering requires taking the appropriate study courses for the degree. Project engineers work in a variety of fields, including industrial engineering, quality assurance and even pharmaceuticals. The jobs will differ, but courses are often similar, especially for starting positions.
The 1979 Pontiac Firebird and the 1979 Trans Am were designed to many of the same specifications. However, each model vehicle was designed with a different standard engine.
The Polaris Outlaw 450 MXR and the Honda TRX 450R are all-terrain vehicles (ATV). While Honda offers a 2011 model of their TRX 450R ATV, 2010 was the last year of production for the Polaris Outlaw MXR.
Chevrolet's Suburban sport utility vehicles date all the way back to 1935. Several different Chevy Suburban models were released between 1960 and 1969.
Chevrolet has been manufacturing automobiles in direct competition with the Ford Motor Co. since 1911. Over the years, Chevy has produced a wide variety of 1-ton pickup trucks. In 1981, Chevrolet released two 1-ton K30 truck models.
The RM 250 is part of a line of motorbikes manufactured by Suzuki that was first introduced to consumers in 1975 and is still in production as of 2010. This particular bike is not street-legal, but was designed only for off-road applications.
Case IH is a manufacturer of agricultural equipment. The Case 9330-model four-wheel drive agricultural tractor was manufactured between 1996 and 1999. Before it was discontinued, this tractor came with a $107,000 price tag in 1999.
Bobcat is one of the world's leading manufacturers of compact construction equipment. They have introduced dozens of models of skid steer loaders to the marketplace over the years. The M310 model skid steer loader was introduced in 1977.
The Chevy Blazer is a mid-sized sport-utility vehicle. In 1998, Chevy manufactured two-door as well as four-door Blazer models. Four-wheel drive Blazers and two-wheel drive Blazers were produced in this year.
Bobcat specializes in the manufacturing of compact construction equipment. Over the years they have manufactured an extensive line of skid steer loader models including the 553, which was first introduced in 1994.
Chevrolet has been manufacturing automobiles and pickup trucks since 1911. In 1978, Chevy offered several different models of trucks. These trucks were designed to many of the same specifications.
Chevrolet has produced several lines and models of vans throughout the years. In 1989 alone, they manufactured a couple of van lines, including the G-Series Van line and the Sport Van line.
Tigercat manufactures several lines of loaders. The T234 and T250B loaders are two models that Tigercat constructs to many of the same but several different specifications.
In 1995, Chevrolet produced four different models of the Suburban line of sport utility vehicles. These models included the two-wheel drive C1500, two-wheel drive C2500, four-wheel drive K1500 and the four-wheel drive K2500.
The Ford 3000 agricultural tractor was produced yearly for the 10 years between 1965 and 1975. Ford discontinued the model in 1975, replacing it with the model 3600 agricultural tractor.
The first Suzuki Esteem was introduced in 1996. Suzuki manufactured new models of the Esteem every year between 1996 and 2002 when production ceased and made several changes to the line of cars throughout the years.
Mercedes-Benz is a German automobile manufacturer that first began producing automobiles in 1926. The W202 series of Mercedes-Benz is the first generation of the company's C-Class line. Models within this series are designed to perform differently from each other.
Buick has been manufacturing automobiles since the early 1900s. Their Roadmaster series of automobiles was assembled on and off between the years 1936 and 1996.
Aeronautical engineering certifications are earned by studying and analyzing the engineering aspects of flight and the science of flying, reports Duke University. Becoming versed in key aspects of flight processes advances the technology with new ideas from aspiring students.
International Harvester manufactured the 574 model agricultural tractor in Doncaster, England, between the years 1970 and 1978. The last International Harvester model, manufactured in 1978, had a $10,000 price tag.
The Lifan Motorcycles Co. is a Chinese manufacturer of motorcycles, but also has a presence in the United States. Lifan produces motorcycles for street use, off-roading, and mini-bike hobbyist use. Every Lifan motorcycle has a unique engine, which is designed for the motorcycle's use.
Along with automobiles and other vehicles, Ford has manufactured many lines and models of agricultural equipment. Ford's four-wheel drive (4WD) 6640 agricultural tractor was assembled on production lines between 1991 and 1998. The 6640 was part of a line of tractors that included the larger Ford 7740 tractor and the smaller Ford 5640 tractor.
Skid steer loaders move and perform turns through a two-part control system. Controls to the left of the operator, whether they are hand controls or foot pedals, operate the tires on the left side of the loader. Controls on the right-hand side of the operator are used to move the tires on the right side of the loader. Many companies currently manufacture lines of skid steer loaders, including Toyota, Case and Mustang. Skid steer loader specifications can vary widely between models.
Mustang has been manufacturing Skid Steer Loaders since 1965. They have since produced several lines of Skid Steer Loaders and continue to offer a number of models in 2010. Currently, Mustang assembles models 2012, 2026, 2041, 2044, 2054, 2056, 2066, 2076, 2086, 2700V and 2109 Skid Steer Loaders. There are many similarities and differences between these Mustang Skid Steer Loaders.
Polaris Industries has been manufacturing vehicles since 1954. Polaris' Trail Boss 250 is a four-wheel all-terrain vehicle with a rear-wheel-drive system.
Skid steer loaders are popular pieces of construction machinery that are employed to scoop material into their bucket for transport to a different area. Operators control these devices through a two-part control system. Left-hand controls operate the tires on the left side of these machines while the right-hand controls operate the tires on the right side of them. Case currently manufactures an extensive line of skid steer loaders including the 410, 420, 430, 435, 440, 445, 450 and 465 Series 3 models.
Ford manufactured its line of Bronco sport utility vehicles between 1978 and 1996. Earlier models of the Ford Bronco, those manufactured between 1966 and 1977, were designed much smaller than the full-sized Broncos released between 1978 and 1996. The 1978 Ford Bronco closely resembles the F-150 released by Ford in the same year. In fact, many of the parts used to assembly the 1978 F-150 are interchangeable with the parts used on the 1978 Ford Bronco.
The Monte Carlo is a type of automobile manufactured by Chevrolet. Monte Carlos saw production lines between 1970 and 1988, then again in 1995 until the line was discontinued in 2007. Chevrolet produced 180,819 Monte Carlos in the 1972 model year, which accounted for over half of all vehicles produced by Chevrolet in 1972. Over the decades, Chevrolet has released six series of Monte Carlo automobiles. The 1972 Monte Carlo is part of the first generation of Monte Carlos manufactured by Chevrolet.
The 1993 Suzuki Katana models came with 600F, 750F and 1100FN designations, referring to the cubic centimeter displacement of the engines. They are crossovers between sport and touring motorcycles.
Suzuki is an automobile manufacturing company that first began offering motorcycles in 1952. The GS 550 is a motorcycle produced by Suzuki. Suzuki offered two different models of the GS 550 in 1978: the GS 550 and the GS 550 E. There are subtle differences between these models.
General Motors Corporation is one of the largest automobile manufacturers in the world. This Detroit-based company has been producing automobiles since 1908. Throughout the years, they have manufactured many different lines and models of vans, including their Safari series. The GMC Safari rolled off the production lines between 1985 and 2005.
The Buick Special, also called the Series 40, was produced from 1936 to 1958. The '56 model had its grille changed and some other cosmetic adjustments, but the biggest change was a larger engine that increased power.
In 1988, consumers had access to four-wheel drive and two-wheel drive Chevy 2500s featuring extended cabs or regular cabs. Diesel-powered Chevy 2500 models were also available.
Suzuki has been rolling motorcycles off the assembly lines since 1952. Suzuki first began manufacturing its "SV650" series of motorcycles in 1999.
Aeronautical engineering is all about aircraft design, manufacture and operation. Becoming an aeronautical engineer involves the intense study of math and science, aircraft performance, aerodynamics, propulsion and aeroelasticity. Aeronautical engineers work in public and private companies and for the government and work with both civil and military aircraft. Those interested in this field of engineering will find colleges across the U.S. offering courses and degrees in aeronautical engineering.
Ford has been manufacturing the Mustang since 1964. In 1993, three different models of the Ford Mustang rolled off assembly lines. Consumers had access to the Mustang LX, Mustang GT and the Mustang Cobra.
Chevy produced several different versions of the C3500 truck in 1989. Some models had different engines, while others were two-wheel-drive or four-wheel-drive vehicles. 1989 C3500 trucks were also available with regular size or extended cabs.
The 1986 Chevrolet Monte Carlo was part of the fourth-generation series of Monte Carlos that were manufactured between 1981 and 1988. Monte Carlos were produced from 1970 to 1988 and from 1995 to 2007.
The Polaris Sportsman 400 is a type of all-terrain vehicle (ATV). Polaris got its start manufacturing snowmobiles and eventually branched off to manufacture other vehicles such as ATVs.
Pontiac manufactured the Firebird Trans Am between 1967 and 2002. Pontiac, a division of General Motors manufactured four generations of Firebird Trans Am models over the decades.
Dodge manufactured several Ram models in 1993, including the Ram 150 and the Ram 250. All of these Rams were equipped with relatively powerful engines.
In 1991, Buick manufactured several models of their Buick Regal, including the Custom coupe, the Custom sedan, the Limited coupe, the Limited sedan, the Gran Sport coupe and the Gran Sport sedan.
Ford applied the name Galaxie to its top-trim full-size Fairlanes in 1959. In 1962 all Ford full-size cars began to carry the Galaxie brand name, and the upper-trim models became the Galaxie 500, 500/XL and 500/LTD. The Galaxie name was discontinued in 1975, and Ford's full-size family cars carried on as the LTD series. Including the 1959 Fairlane Galaxies, the Galaxie brand was in production for four generations. The 1967 Ford Galaxie 500 was part of the third generation.
The 1983 Chevy Monte Carlo was part of a series of Monte Carlos that were produced between 1981 and 1988. There are several different models of the 1983 Chevy Monte Carlo.
The 2002 Ford Ranger Edge offered a number of features that were not available with the standard Ford Ranger. The Edge was designed with a heavy-duty floor, tow hooks, a molded bed rail and a raised hood.
Bobcat Company manufactures a number of skid-steer loaders, including the model 610. Skid-steer loaders move via a two-part system: the left-hand controller moves the left tires, while the right-hand controller moves the right tires.
Praised by its fans for its "extraordinary lines and sleek design," the Katana is a sport-cruiser motorcycle that was manufactured by the Hamamatsu, Japan-based company Suzuki and remains an object of desire for many customizers and restorers, according to the website Katana.
Jeep produced several models of their Cherokee Chief in 1982, including the 4.2-liter Cherokee Chief and the 5.9-liter, V8 Cherokee Chief. Consumers had a choice of manual or automatic transmission in the Cherokee Chief that year.
Suzuki is a Japanese-based company that manufactures many different kinds of vehicles, including cars, motorcycles and all-terrain vehicles. In 1996, Suzuki manufactured the DR 200 dirt bike. It is designed for use off-road
Ford is the company that manufactures the 555 loader/backhoe. Production on this machine ceased in 1983. The backhoe on this machine can be fitted with one of several different buckets.
Ford manufactured their 3400 model tractor between the years 1965 and 1975. Highland Park, Michigan, hosted the factory where the Ford 2400 tractor was produced.
Skid steer loaders are machines that are employed to scoop and transport material within a work area. They use a two-part system to perform turns; right tires or tracks are operated with one control while the left tires or tracks are operated with a different control. Many companies manufacture skid steer loaders including Bobcat, Caterpillar New Holland, John Deere, Mustang and Thomas.
Hyundai is the manufacturer of two different types of skid-steer loaders, the HSL610 and the HSL810. It also currently manufactures several wheel loaders including the HL730-9, HL740-9, HL757-9, HL760-9, HL770-9 and the HL780-9.
The Bobcat 743 is a skid steer loader. As with all skid steer machines, the wheels on the left side of this loader are operated independently of the right wheels. Loaders are used to load trucks or transport materials throughout a work site.
Bobcat manufactured their 610 skid steer loader between the years of 1972 and 1982. Loaders are engine-powered machines that feature buckets. They are employed to scoop up and load materials onto trucks or move material from one location to another.
The Bobcat 610 is a skid steer loader manufactured by Bobcat. Skid steer loaders are machines that feature lift arms and are powered by an engine. The lift arms are often fitted with buckets, creating efficient loaders.
Correspondence courses in technology and engineering are slowly becoming prevalent among students in India. Catering to the needs of working professionals, these courses allow them to maintain their current commitments, yet expand on their career skills. Few universities and schools currently offer undergraduate and graduate courses in engineering to prospective students.
Electrical engineering is a broad-ranging field that covers the study of electronics, the use of electromagnetic fields, and other applications for electricity. Courses of study (degree programs) offered in the United Kingdom are similar to those offered in the United States. Areas of specialization include medical imaging, photonics, and nanotechnology.
Mitsubishi is a company that manufactures many different machines. The Mitsubishi MT372 is a type of agricultural tractor. Mitsubishi produced this tractor from 1982 through 1988.
Generators are machines that transform mechanical energy into electrical energy; they can be used to run a variety of electrical appliances for home or commercial use. There are numerous types of generators; some rely on natural gas, diesel or wind as energy sources. Most generator repair courses are provided by companies that distribute parts or service engines and generators for home or industrial use. The courses provide a comprehensive training on the proper installation, maintenance and inspection of generators.
Good Manufacturing Practices (GMP) training for food is an important course that food manufacturers must take. Food manufacturers must, by law, demonstrate that their production practices adhere to the Food and Drug Administration's standards.
Like all professionals, engineers may encounter situations in which they must make judgment calls on ethical dilemmas. Most often, ethical dilemmas involve a conflict in fundamental principles of right or wrong. Codes of ethics and studying classical issues in engineering ethics help engineers make sound moral decisions.
Sound engineering, also referred to as audio engineering, entails the methods used in reproducing sound. Professional positions include recording engineer, sound engineer and audio engineer, amongst others. The East Asian republic of Singapore offers a number of institutions of higher learning for those seeking educational opportunities. Sound engineering programs are available at various levels for students interested in pursuing coursework in the field.
An engine lathe is a machine that has the capacity to cut or grind shapes into given materials. Engine lathes employ components that are all necessary for the machine to function safely and properly.
Mechanical engineering covers a broad range of techniques, tools and topics, including running or working in a machine shop, modeling various engineering problems with computer modeling software, particle measurement and special concerns for engineers in various climate zones. Many universities offer short courses, seminars and workshops focused on particular areas of study within mechanical engineering, some of which fulfill licensing requirements for engineers who want to go into business with the public.
Genetic engineering is a specialty within biotechnology that refers to the process of locating, identifying and sequencing genes in order to modify and manipulate all types of organic material. Genetic engineering holds great promise in a range of contexts, from medical treatment to food production. Several highly-ranked, post-secondary schools in the United States offer genetic engineering courses.
Degree programs in mechanical engineering instruct students on the creation and modification of machine systems. The discipline plays a prominent role across several professional and academic fields, notably industry, transportation, science and medicine. Coursework in mechanical engineering is often a conglomeration of advanced mathematical study, physics, material analysis and chemistry. Several higher education institutions in the United States offer degrees in mechanical engineering.
Malaysia draws international students due to the availability of high-quality English-language programs. Its Ministry of Higher Education states that Malaysia experienced a marked increase in overseas students--from 70,259 in 2008 to 80,750 in 2009--most of whom study in private colleges or local campuses of foreign universities. Malaysia's undergraduate chemical engineering programs feature high levels of research and development and typically require a high school diploma for admission.
Mechanical engineers specialize in the design and manufacture of any equipment with moving parts. They are major factors in the design of equipment such as automobiles, trains and aircraft. Engineering degrees in Europe are usually three years in length, but in Scotland, the study takes four years and with the accreditation by the Institution of Mechanical Engineers, graduates of these schools are assured employment in a variety of fields throughout Europe.
Civil engineers are responsible for planning and designing public facilities like highways, bridges and irrigation projects. Other areas of specialization include environmental, water resource and transportation engineering. Civil engineering courses in the U.K. are at the certificate, bachelor's and graduate levels. Careers are available in a wide array of fields such as marine hydrology, transportation, rail and utilities.
The term engineering is one of both depth and breadth, as the field has numerous varieties and types of applications. Given the fact that there are so many different careers in engineering, it becomes quite easy to see that there are even more engineering courses in colleges. To help navigate the complex selection, it's good to know the more common types of engineering classes.
Mechanical engineers are the so-called generalists of the engineering profession. As such, mechanical engineering students must not only have strong math and science skills, as required of all engineering students, but they must also accumulate a broad knowledge of other engineering disciplines to be successful in the workforce. The curriculum is very demanding, and only those students who are dedicated survive the grueling course requirements to complete this very rewarding degree.
Mechanical engineers are tasked with brainstorming, researching, designing, building and analyzing mechanical devices. Professionals in the field may work on small hand-held items or building-sized equipment such as elevators and air conditioners. The United States Department of Labor predicts a 6 percent rise in employment of mechanical engineers through the year 2018, with an average annual salary of $58,766 as of July 2009. Mechanical engineers train for their careers through mechanical engineering courses and degree programs.
Sound engineering involves the production and recording of music using a range of electronic devices. It could include mixing tracks, sound reinforcement or acoustics, for example. Though it is, in a sense, a scientific discipline, many colleges in the U.S. that offer courses in sound engineering specialize in the field of music. Sound engineers may often find themselves working with recording musicians, usually students themselves, as part of their studies.
University engineering programs attract some of the best students with their cutting-edge subject matter and career potential. With competition so fierce, colleges set high standards for admission to engineering departments. The federal "Occupational Outlook Handbook" states that recent engineering grads earn some of the highest starting salaries–$83,121 for a petroleum engineer–with double-digit growth predicted in specialties such as biomedical and environmental engineering.
Whether you enjoy tinkering with computers, cars or other electronic or mechanical gizmos, a career in the engineering field may be an ideal match. For most engineering-related professions, a minimum of a bachelor's degree is required. Colleges across the country have engineering departments, with one to more than ten different engineering options. Programs combine general core classes such as English, history, social science, fitness and foreign languages with engineering-specific course work directly related to the type of engineering program chosen by the student.
As one of the world's biggest manufacturing countries and in 2010 the world's second-largest exporter, Germany has a long tradition with engineering, technology and manufacturing. As a result it has some of the world's best technical universities. Many universities in Germany are called Technical Universities and at one time they restricted their teaching to technical and engineering subjects. Today, however, they offer a range of subjects and you will often see humanities and arts courses now being taught.
When you think of a mechanical engineer, you probably think of a person who designs automobiles and rocket engines and converts one form of energy to another. Mechanical engineers do all that and then some. They use their education, knowledge and experience in engineering to help solve global technological and economic challenges. Their knowledge and skill are first developed through diligence in completing a rigorous curriculum of mechanical engineering courses.
Quantity surveyors are responsible for controlling costs and ensuring best value within a construction setting. Training courses, delivered at degree and professional levels, provide the skills necessary to deliver accurate estimates of the labor, plant and materials involved in any given project. Quantity surveyors in Canada are represented by the Canadian Institute of Quantity Surveyors (CIQS).
It took NASA engineers to officially acknowledge what homeowners have know for years: Houseplants are beneficial to your home. Dr. B.C. Wolverton, an environmental engineer for NASA, conducted numerous plant studies over the course of 20 years, and he determined that house plants remove harmful contaminants and purify the air. His top 10 list of house plants includes areca palm, lady palm, bamboo palm, rubber plant, dracaena "Janet Craig", philodendron, ficus alii, dwarf Date palm, Boston fern and peace lily.
Nozzle configurations are critical to the efficiency of any jet aircraft engine and can range from fully articulated after-burning systems to static outlet or fully integrated configurations. Essentially, engine nozzles allow engine thrust to be compressed beyond its nominal pressure level, reduce that pressure or re-direct thrust across a range of movement. In general, aircraft use three primary nozzle configurations today: articulated, static or movable.
Learning to DJ consists of mastering three basic elements. The first is programming--which is the choosing of the music. The music might share qualities to allow for a harmonic blend. Keys come into play, as does tempo---even popularity. The second element is mixing---the tracks should transition in a fluid way. Learning this element includes mastering the speed of the tracks, and also mastering the crossfader to transition the tracks into each other. The third element to master is the remix---which can include scratching, loops and sampling. There are vast resources available to learn to DJ on line.
As a civil engineer, you will plan, design, build and manage facilities such as bridges, dams, highways, transit systems, airports, tunnels and more. According to the undergraduate civil engineering degree program at Michigan Tech, civil engineers find solutions to fix problems such as deteriorating infrastructure, traffic congestion, energy needs, floods, earthquakes, urban redevelopment, sustainability, pollution control and community planning. As a civil engineer, you may also manage and direct technological advances meant to protect Earth's ecosystems. As an undergraduate with a major in civil engineering, there are courses that will be required for you to take in order to complete…
Most states (around 30) now require engineers to take addition enhancement courses to maintain their licenses. The reason behind PDH (Professional Development Hours) requirement is so that engineers can continue to grow in learning. Four states, Florida, Louisiana, New York and North Carolina, must preapprove courses. Other states that have PDH requirements allow you to choose any course that is related to your field. It is up to you to make sure that the content of the course is relevant.
Undergraduate aerospace engineering students must take a range of required liberal arts and sciences courses in addition to the principal core degree courses in aerospace design and physics. This is true for both on-campus students and those pursuing online degrees.
For those who have the passion in aviation and wanted to earn a job right away then I believed becoming an aircraft mechanic is the best option. The Aircraft Maintenance Technician (AMT) Course or Aircraft Maintenance Engineering (AME) Course will help you obtain your Airframe & Powerplant Mechanic's License. This license is important for you to be eligible in the airline, MRO, or other companies requiring aircraft maintenance engineers. Depending on the country's requirement, the AMT course may take up to 16 to 24 months. Some aviation colleges offer two or four year bachelor's degree. You may undergo an on-the-job…
Flight engineers are critical to today's complex commercial airline operations. Although FE's do not actually fly the airplane (and some can), they have significant responsibilities both on the ground and on the airplane.
Most light aircraft carry Lycoming air-cooled aircraft engines, although today there are annumber of alternatives to this conventional approach . These range from new purpose aircraft variants to conversions of existing automobile engines.
