Discover the expert in you.
Discover the expert in you.
You can convert from the American system to the Metric system using simple multiplication. Multiply to convert to metric with help from an experienced math teacher in this free video clip.
Fitting the correct size tire to a wheel is vital to ensure an airtight seal, good road handling and reduce the chances of an accident. Selecting a suitable tire involves ensuring that you use a tire with the correct width. Dimensions are stamped on the wall of the tire, using inches for the wheel diameter, and metric millimeters (mm) for the tire width. A letter, if present, indicates the speed rating. Converting the metric width into customary inches is a straightforward task requiring no specialist skills.
Over time general wear and tear on bolts will cause the thread around the outside to weaken and break. There are two choices of what to do: replace the bolt or rethread it. Rethreading a bolt is not as complicated as it sounds as long as the correct-sized tools are used. A common misconception is that bolts are rethreaded using a tap, when what the size of the bolt refers to is the die which does the actual cutting.
Metric units of measurement are used in countries all over the world, so it's useful to remember how to convert from our standard measurements to metric system measurements and vice versa. Converting from kilograms to pounds or ounces is quite simple, as long as you can remember the conversion rate.
The Joule is a measurement of energy. Lift an apple that weighs approximately four ounces a distance of one yard above the table on which that apple rests and you have expended one Joule of energy. In fact, scientists sometimes refer to the Joule as a Newton-meter because the Joule represents one unit of force, the Newton, exerted over a distance of one meter. The BTU, or British thermal unit, is another unit of energy. Because both units measure the same physical quantity -- energy -- you'll find it simple to convert from one to the other.
Thread length refers to the length of the thread, or helical section of a bolt or screw. Knowing the thread length is helpful when organizing bolts and screws, replacing old, warn hardware and choosing the appropriate hardware to use for projects. In general, screws and bolts are standardized so that hex cap screws and bolts equal in length have an equal thread length.
The metric system has come in to wide acceptance throughout the world and science. Since it is based on a base 10 system of measurement, conversions and calculations are simpler than the royal, or British, system of measurements. The metric system provides units of measure for the major categories, such as distance, weight, volume and energy. The system is dominant in the sciences as the measurements have many simple relationships between the categories, especially when it comes to measuring water.
A dekatherm is a measurement companies use to measure volumes of natural gas, which can be quite large. A single dekatherm is equivalent to 10 therms or about a million British thermal units (BTUs) of energy. More precisely, a dekatherm is equal to 1,000,670.27059 Btus. Despite the large numbers you will have to deal with, converting dekatherms into Btus is straightforward and can be done with a simple calculation.
While not as regularly used as some other measurements, the decimeter may be a handy unit in some situations. The word decimeter comes from "deci," which means one-tenth, and "meter," which is the base measurement of length in the metric system. When compared to the English system of measurements, the metric system tends to be much easier to convert into larger or smaller measurements, such as a decimeter to a millimeter.
Outside the United States, body height is usually measured using the metric system. The height is expressed in meters and centimeters, the official metric measurements of length. In the United States, the standard measures are the customary inch and the foot. Converting from metric measurement to customary ones is a simple process, as is rounding the height to the nearest inch or foot. A calculator may be required to simplify the conversion calculations.
Milligrams, abbreviated mg, and metric tons, called "tonnes" and abbreviated t or MT in the United States, are units of mass in the metric system. A milligram equals 0.001 g while a metric ton equals 1,000 kilograms. Because the metric system uses a base-10 system, you can convert between milligrams and metric tons if you know the power of 10 to use.
Both the metric ton and the teragram are based on the gram. The teragram (Tg) unit is employed to gauge gargantuan weights. The prefix "tera" means one trillion, so a single teragram equals one trillion grams. The metric ton, also known as a tonne (t), is a smaller unit, measuring a thousand kilograms, which is also one million grams. You can convert weight in teragrams to its metric ton equivalent through these great-numbered relationships.
The metric system has many different units of weight. Some of those units, like the metric ton, are easy to recognize, while others, like the petagram, are extremely uncommon. A metric ton (t), also called the tonne, is equal to a thousand kilograms -- or a little over 2,204 lb. A petagram (Pg) is equal to one quadrillion grams. To convert a metric ton to a petagram, you only need to perform some simple calculations that include a large number of zeros.
The metric ton, also called the tonne, and the gigatonne are two units of mass in the metric system. Both quantify extremely large measures of mass. A metric ton equals 1,000 kilograms, or just over 2,200 lb. A gigaton represents a billion times more mass than a metric ton because the profix "giga-" equals 10^9, or 1 billion. Converting between the units helps you to compare different masses when the mass is listed in different units.
The tonne, called the metric tonne by the U.S. Department of Commerce to avoid confusion with the ton, measures mass in the metric system. In American units, the metric tonne equals 2,204.623 pounds. If you are selling or shipping large quantities of goods, you want to make sure that you are specifying the right amount of weight. For example, if you have a mass in pounds but the contract states a mass in metric tonnes, you need to convert the measurement.
Converting the number of gallons in a barrel to liters is an easy task, but it depends on the kind of barrel involved. Liquid and dry measurements for barrels differ, as do the size of barrels. Originally, a barrel of oil contained 42 gallons, but now oil barrels hold 55 gallons. A beer barrel holds 31 gallons, also called a full keg of beer. A barrel of wine holds 59 gallons. Converting the barrels used per day involves simple math to reach the liters used per day.
The metric system is a logical system of measurements based on multiples of ten. it has been incorporated as the standard system in most countries throughout the world. Measurements used in science and in most of industry are based on the metric system. To convert imperial units such as ounce, foot, and degrees Fahrenheit into metric units, all you need to do is employ the correct conversion factors.
In 1670, a French vicar named Gabriel Mouton originated the decimal-based metric system, which has gained near-worldwide acceptance, with at least one notable exception. Although the United States has taken steps to officially adopt the metric system, it was met with considerable public resistance. The United States continues to maintain the somewhat archaic "customary" system of measurement. You can convert between the two systems with simple division or multiplication.
Metric ton-force, which is often shortened to "metric ton," and kilonewtons are both metric measurements of force. Conversion between kilonewtons and metric ton-force can be accomplished with a simple division or multiplication. There are 9.80665 kilonewtons for every metric ton-force. Therefore, to convert between the two, you would divide kilonewtons by 9.80665 to convert to metric ton-force, or multiply the metric ton-force by 9.80665 to convert into kilonewtons.
If you are an American, when you refer to a ton, you probably mean the short ton of 2,000 pounds as opposed to the UK ton -- the long ton -- of 2,240 pounds. Neither of these tons has any exact equivalent in the metric system. At 2,204.6 pounds, the metric ton falls between the short ton and the long ton. Once you learn these numbers, converting between the three types of tons becomes a fairly simple process.
Metric and English screw threads are two different systems of standardization for screws and bolts. Both systems characterize screws by two main numbers: the screw's major diameter and the frequency of the threads, or turns. The major difference, other than units, is that the metric system measures the distance or "pitch" in millimeters from thread to thread, or equivalently, how far the screw or bolt advances after one complete turn. The English system instead measures the number of threads per inch.
The standard system of measurement throughout most of the world is the metric system. Thus, you will often need to convert from the English system, also known as the U.S. system, to the metric system. The metric system bases measurements on factors of 10; however, the English system requires conversion factors that are more complex. These conversion factors are different for all units of length, area, volume, mass and temperature. The National Institute of Standards and Technology provides reliable conversion tables.
Metric bolts are characterized by grade, diameter, thread pitch and length in metric units, which were developed in France and formalized as an international standard as the SI, or "Systeme International." U.S. threads on bolts are specified in threads per inch with the other characteristics also in British Standard units. Other thread characteristics such as thread shape are given in units such as degrees of an angle, which are common to both systems. The SI is the only system used in Europe, while North America uses both systems.
Metric and decimal are best known as two systems of measurement that rely on different unit bases. The system commonly used in the United States is the decimal system, or the "standard" system, whereas most countries outside of the United States use the metric system. Given that both systems were in use as of 2010, conversions between units in each system are useful and oftentimes necessary when working with hardware. The term "decimal" in reference to the standard system of measurements suggests lengthwise conversions -- those that deal with fractions of an inch.
The idea of a ton might seem simple and straightforward, but in fact there are several different units of measurement that fall under this name. The U.S. ton, also known as a short ton, is equal to 2,000 lbs. The long ton, or the British ton, is slightly larger at 2,240 lbs. The metric ton, also known as a tonne, is 1,000 kg or approximately 2,204.624 lbs. Converting between units is a fairly simple process once you learn the conversion factor.
The USA system of measurement uses seemingly random units of measurements that do not clearly relate to each other. A foot, for example, is 12 inches long, and a cup holds 8 fluid ounces. The metric system, on the other hand, is clearer in its measurements; there are 1,000 millimeters, 100 centimeters and 10 decimeters in a meter. This makes many conversions within the metric system fairly easy. Kilograms and metric tons both measure mass, with a kilogram being significantly smaller than a metric ton. You may wish to convert metric tons to kilograms for the same reasons you would…
Kilograms, or kilos, are commonly used units of mass in the metric system, which is used throughout the world. Metric tons are different than United States standard tons because they relate more closely to kilograms than pounds. While kilograms are not used widely in the United States, many specialty and academic fields use the metric system. It is easy to convert kilograms to metric tons once you learn the appropriate conversions.
In the metric system, you measure volume in liters rather than gallons, quarts or fluid ounces. If you are dealing with less than a liter, you might measure it in milliliters (one thousandth of a liter), centiliters (one hundredth of a liter) or deciliters (one tenth of a liter). For large volumes, you might express the measurement in kiloliters, each of which is equal to 1,000 liters. Converting these metric measurements of volume to gallons is fairly straightforward once you know the conversion factor.
The units metric tons and grams are measures of weight used in the metric system. Unlike an American ton while is equal to 2,000 pounds, a metric ton is 1,000 kilograms. To avoid confusion, the metric ton is abbreviated MT or t. Grams are a much smaller unit of mass and are abbreviated g. If you want to compare two masses in different units, you need to convert them.
The metric system is the international system of measurement adopted by nearly every country except the United States, Liberia and Myanmar (Burma). Because of its vast usage, you may frequently find foods or even cookbooks that are in metric measurements. It's important to know how to convert the imperial system to the metric system to avoid ruining your dinner or dessert. Converting quarts to liters is one of the more simple conversions that doesn't even require the help of a calculator.
You can use American tons, British tons or metric tons, sometimes spelled metric tonnes, to measure large quantities of mass. Although they are called tons, they represent three different quantities of weight. The American ton is equivalent to 2,000 lbs., while the metric ton, abbreviated MT or t, is equal to 2,204.623 lbs. The British ton is equal to 2,240 lbs. By combining these measurements, you can find conversion factors so you can go directly from metric tons to American tons or British tons.
Long tons and metric tonnes are two units of mass. The long ton, also known as the British ton, is equal to 2,240 lb. The metric tonne, a unit in the metric system equal to 1,000 kg, is equal to 2,204.623 lb. In order to not confuse the metric tonne with the British ton, you can abbreviate the metric tonne to MT or just t. Converting between these two units will help you make accurate weight comparisons.
A British thermal unit, or BTU, is a unit of energy used in heating and cooling applications. It shows the relative power of air conditioners and other household appliances, like space heaters. The BTU is convertible into other commonly-used units such as the kilowatt-hour and horsepower, as well as a less common unit, the foot-pound, which used to measure torque. Convert these metrics to the BTU using a customized conversion factor for each different unit.
A bolt is a threaded metal fastener that is used to securely adjoin mechanical pieces of one larger system. Although used for similar applications, bolts are distinguished from screws by their flat bottoms. There are many different types of bolts, each of which is identified by five separate features--the head, the material, the bolt diameter, the bolt length and the thread count. The latter three features can be given in terms of metric or US standard measurements. When US standard bolts are the only type available for a metric application, a conversion between the two systems is necessary to identify…
Kilograms and metric tons, also known as tonnes, measure mass. Kilograms are abbreviated kg while metric tons are abbreviated t. Metric tons are significantly larger than kilograms, which can make it easier to express larger quantities, while the smaller unit of a kilogram can be more appropriate for quantifying smaller amounts. For example, it would be easier to say 1.2 metric tons than 1,200 kilograms.
When using a microscope, measurements are recorded in micrometers, which is 0.001 of a millimeter, or about 0.000039 of an inch. (Reference 1) It is often useful to know the diameter of the entire field of vision of a microscope under low power, because it can assist with estimation of the sizes of the objects being examined under the microscope.
The metric system of measurement is much simpler to understand than the English system commonly used in the United States. The basic unit of length is the meter, which equals 39.37 inches. A decimeter equals 0.1 meter, or 3.937 inches. A centimeter is 0.01 meter, so it equals 0.3937 inch. A millimeter is 0.001 meter, equal to 0.03937 inch. Similarly, a kilometer is 1,000 meters, or 39,370 inches. Just apply these factors to convert various metric units of length to inches.
A vast majority of the world, including Europe, uses the metric system. Unfortunately, the United States does not and this can create problems when exchanging quantities of goods or materials. Fortunately, once you know the conversion factor, you can execute a simple formula to compute metric quantities into imperial quantities. In addition, each metric unit of measurement has three main components that can be easily converted among each other (e.g., milligrams, grams and kilograms).
If you ever shop for clothes made in another country, you'll want to be able to convert metric units into non-metric units. America is just about alone in using the English system of measurement, so if you are traveling abroad or buying products that are not made for the American market, you might be curious to know how long a 75 inseam really is.
